Abstract:The exploitation of high-efficiency and cheap bifunctional cathode electrocatalyst is of significant importance to rechargeable zinc–air batteries. In this paper, a bimetallic sulfide coupled with a CNT ((Co, Mg)S2@CNTs) hybrid catalyst is developed via a proposed vulcanization process. The (Co, Mg)S2@CNTs) with controllable Mg substitution has a tailored crystal structure (amorphous and crystalline), which catalyzes the oxygen reduction/evolution reaction (ORR/OER). The active sites of CoS2@CNTs are activated by doping Mg ions, which accelerates the kinetics of the oxygen adsorption for ORR and oxygen desorption for OER. Meanwhile, the hybrid catalyst exhibits a unique hierarchal morphology and a "catalytic buffer", which further accelerate the mass transfer of catalytic processes. In addition, the outer wall of CNTs as substrate effectively avoid the agglomeration of (Co, Mg)S2 particles by reasonably providing adsorption sites. The inner and outer walls of CNTs form a high-speed conduction pathway, quickly transferring the electrons produced by oxygen catalytic reactions. As a result, the (Co, Mg)S2@CNTs exhibit an ORR performance comparable with commercial catalyst Pt/C-RuO2 and remarkable OER performance (Ej=10 = 1.59 V). The high power density of 268 mW cm–2 and long-term charge/discharge stability of the zinc–air battery proves the feasibility of (Co, Mg)S2@CNTs application in high-power devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c09385?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c09385</a>.Experimental section, summary of LSV data of different electrocatalysts, table of zinc-air batteries with several key parameters extracted from previous literatures, SEM images, XPS survey, EDS spectrum, Raman Spectra, electrochemical measurements,battery performances and ASR-current density curves (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c09385/suppl_file/am0c09385_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultrafine Mn3O4 Nanowires/Three-Dimensional Graphene/Single-Walled Carbon Nanotube Composites: Superior Electrocatalysts for Oxygen Reduction and Enhanced Mg/Air Batteries

Porous Calcium-Manganese Oxide/Carbon Nanotube Microspheres As Efficient Oxygen Reduction Catalysts For Rechargeable Zinc-Air Batteries

Design and integration of binder-free MnO2 nanotube arrays on carbon cloth as efficient cathodes for Mg-air batteries

Cu ion doping α-MnO2 nanowire electrocatalysts for Mg-air battery

Highly Efficient and Stable Bifunctional Electrocatalyst with Alloy/Oxide Heterostructures for a Rechargeable Zinc–Air Battery

Atomic Fe-Nx Coupled Open-Mesoporous Carbon Nanofibers for Efficient and Bioadaptable Oxygen Electrode in Mg-Air Batteries

Bimetal Oxides Anchored on Carbon Nanotubes/Nanosheets as High-Efficiency and Durable Bifunctional Oxygen Catalyst for Advanced Zn-Air Battery: Experiments and DFT Calculations

Three-dimensionally ordered mesoporous Co3O4 decorated with Mg as bifunctional oxygen electrocatalysts for high-performance zinc-air batteries

Atomically dispersed Mn, N doped the cotton biomass aerogel of carbon fibers as bifunctional oxygen electrocatalyst for long-term rechargeable Zn-air battery

Trimetallic Sulfide Mesoporous Nanospheres as Superior Electrocatalysts for Rechargeable Zn–Air Batteries

Hierarchical Porous Double-Shelled Electrocatalyst with Tailored Lattice Alkalinity Toward Bifunctional Oxygen Reactions for Metal–Air Batteries

Hierarchical Porous Manganese- and Nitrogen-Codoped Carbon Nanosheets Derived from Surface Modified Biomass as Efficient Oxygen Reduction Catalysts for Al-Air Batteries

Design of Fe/Co-N doped porous carbon sheets by hard template strategy as an oxygen reduction catalyst for Mg-air batteries

Cobalt nanoparticles supported on nitrogen-doped carbon nanotubes for the efficient oxygen reduction reaction in Mg-air battery

Bimetallic Sulfide with Controllable Mg Substitution Anchored on CNTs as Hierarchical Bifunctional Catalyst toward Oxygen Catalytic Reactions for Rechargeable Zinc–Air Batteries

Three-dimensional MnO2 Ultrathin Nanosheet Aerogels for High-Performance Li–O2 Batteries

In situ produced Co9S8 nanoclusters/Co/Mn-S, N multi-doped 3D porous carbon derived from eriochrome black T as an effective bifunctional oxygen electrocatalyst for rechargeable Zn-air batteries

Au-nanocrystals-decorated Δ-Mno2 As an Efficient Catalytic Cathode for High-Performance Li-O2 Batteries.

Mn, N, P-tridoped bamboo-like carbon nanotubes decorated with ultrafine Co2P/FeCo nanoparticles as bifunctional oxygen electrocatalyst for long-term rechargeable Zn-air battery

Three-dimensional Composite Catalysts for Al-O2 Batteries Composed of CoMn2O4 Nanoneedles Supported on Nitrogen-Doped Carbon Nanotubes/Graphene.

Co(II)1-xCo(0)x/3Mn(III)2x/3S Nanoparticles Supported on B/N-Codoped Mesoporous Nanocarbon As a Bifunctional Electrocatalyst of Oxygen Reduction/Evolution for High-Performance Zinc-Air Batteries.