Abstract:We demonstrate 40 Gb/s all-optical clock recovery by using a monolithic integrated amplified-feedback laser (AFL) with coherent injection-locked method. The AFL consists of a gain-coupled DFB laser and an optical amplified feedback external cavity. With proper design and operation of AFL, the device can work at self-pulsation state that resulted from the beating between two lasing modes. The self-pulsation can be injection-locked to the optical clock embedded in input data streams. Due to different work mechanisms, there are two all-optical clock recovery operation modes: incoherent injection-locked and coherent injection-locked. It's predicted that the coherent injection method has various advantages: 1) requiring low injection power recovery, 2) independent of the bit rate and 3) introducing little timing jitter to the recovered clock. The robustness of coherent clock recovery is confirmed by our experimental results. We set up a return-to-zero (RZ) pseudorandom binary sequence (PRBS) data streams all-optical clock recovery system. This coherent injection-locked based clock recovery method is optical signal noise ratio (OSNR) and chromatic dispersion (CD) degeneration tolerant, and has low timing jitter and high sensitivity.

Fast-synchronization and Low-Timing-jitter Self-Clocking Concept for 160 Gbit/s Optical Time-Division Multiplexing Transmissions

Self-Clocking Based on In-Band Pilot for Ultra-High Bit Rates Otdm System

Clock recovery based on in-band pilot cfor 160 Gbps OTDM signal

Clock Recovery Based on In-Band Pilot for 160 Gbps OTDM Signal

40 Gb/s All-Optical Packet Clock Recovery with Ultrafast Lock-in Time and Low Inter-Packet Guardbands.

Simultaneous Clock Recovery for 160 Gbit/S Optical Time-Division Multiplexing Signal Using Phase Modulation

High-speed Optical Signal Processing for Telecom Applications

160-Gb/s clock recovery with an electro-absorption modulator and 40-Gb/s ETDM demultiplexer

In-band clock distribution concept for ultra-high bit rates OTDM system

160-Gbit/s Clock Recovery Using an Electro-Absorption Modulator and 40-Gbit/s ETDM Demultiplexer

Low timing jitter 40 Gb/s all-optical clock recovery based on an amplified feedback laser diode

Optoelectrical Clock Recovery with Dispersion Monitoring for High Speed Transmission

Simultaneous Clock Enhancing and Demultiplexing for 160-Gb/s OTDM Signal Using Two Bidirectionally Operated Electroabsorption Modulators

A Clock Enhanced Loop for Simultaneous Error-Free Demultiplexing and Clock Recovery of 160 Gb/s OTDM Signal Single-Channel Transmission over 100 Km

Ultra-low Timing-Jitter 40ghz Clock Recovery Using EAM-MZM Double-Loop and Its Application in a 640gbit/s OTDM System

Simultaneous Clock Recovery and Demultiplexing of A 320 Gb/S Otdm System Using an Optoelectronic Oscillator Based on Cascaded Mzm and Polm

A New Proposal Of All-Optical Frame Synchronisation Recovery

Novel Scheme of Clock Recovery for High-Speed Otdm Signals Based on Stimulated Brillouin Scattering

80 GBaud optical transceiver with time division multiplexing

Timing-jitter Reduction by Demultiplexed-Feedback Clock Recovery in a 160gbaud Serial Data Transmission System

40 Gb/s Clock Recovery Based on Optical Phase-Locked Loop