Starch Processing Wastewater Treatment Using a Continuous Microbial Fuel Cell with MnO_2 Cathodic Catalyst

卢娜,周奔,邓丽芳,周顺桂,倪晋仁
2009-01-01
Abstract:This study constructed a tubular two-chamber microbial fuel cell(MFC) using MnO2 as cathodic catalyst for treating starch processing wastewater under a continuous-flow mode.The MFC performance of power generation and wastewater treatment was evaluated by measuring the voltage output,removal efficiencies of chemical oxygen demand(COD) and ammonium-nitrogen(NH+4-N).Compared with the MFC without MnO2 loading,the maximum power density of the MnO2-catalyzed MFC was increased by 4.2 times,and the removals of COD and NH+4-N were enhanced by 8.3% and 7.0%,respectively.The effects of initial COD concentration,pH and conductivity on the MFC performance were further studied for optimization.The results showed that the optimum conditions for MFC operation were:initial COD concentration of 2426.0mg/L,pH of 7.0,and NaCl concentration of 2.0g/L.Under the optimum condition,the MFC approached a maximum power density of 30.8W/m3 at a current density of 121.0A/m3,and the highest COD removal of 92.7% and NH+4-N removal of 86.5%.The study suggested that the inexpensive catalyst of MnO2 is very promising for MFC application as an approach to simultaneous power generation and wastewater treatment.
What problem does this paper attempt to address?