Abstract:The compressive mechanical properties of concrete-based materials are strongly affected by the presence of additions in the mix and load application velocity. Fiber-Reinforced Rubberized Concrete (FRRC) was recently proposed in the literature as a concrete-based material with the aim of obtaining a ductile material with reduced environmental burden and characterized by excellent energy absorption performances during impact loading. FRRC joins and balances the advantages and drawbacks of Fiber Reinforce Concrete (FRC) and Rubberized Concrete (RuC). However, its behavior has rarely been investigated under dynamic loadings, although gaining sufficient knowledge on their high strain rate behavior is crucial for their full-scale application. This study aims to investigate the high-strain rate compressive behavior of FRRC with fine rubber aggregates and micro-straight steel fibers. Tests were performed using conventional quasi-static loading with a compressive testing machine and high-strain rate tests with a 080-mm Split Hopkinson Pressure Bar (SHPB) for strain rates up to 200 s(-1). The experimental program comprises the characterization of Plain Concrete (PC), FRC, RuC, and FRRC with a full test matrix (a total of 192 specimens) covering fiber contents up to 1.5% and rubber volume substitution ratios up to 30%. The micro-scale characterization of the material using SEM scans provided a complete understanding of the observed macro-scale behavior. A high-speed camera was used to capture the cracking development processes. The measurements both for quasi-static and dynamic tests indicate that the addition of fibers improves the ductility or toughness with a slight increase in the compressive strength and the substitution with rubber aggregates significantly reduces the compressive strength with improved ductility or toughness. The combination of fiber and rubber (FRRC) leads to a combination of the previously described single marginal effects. The dynamic tests reveal the marked strain rate dependency, although specimens with large rubber volume substitution were more sensitive to the strain rate effect within the considered test range. Based on the test data, data-driven models for strength reduction factor (SRF) and dynamic increase factor (DIF) are proposed for different types of FRRC. The image-based waveform discussion provides evidence of the "double-peak" phenomenon highlighting the different features of the observed signals and damage evolution. Ultimately, this study indicates that FRRC has an excellent high-strain rate compressive behavior and can be a promising material to be employed to protect structures against impact and blast loads.

Experiment and Study on SFRC Subjected to Impact Loading

Experimental study on dynamic behavior of CFRP-to-steel interface

High-strain rate compressive behavior of Fiber-Reinforced Rubberized Concrete

Dynamic Behavior of CFRP-Strengthened Reinforced Concrete Beams Without Stirrups under Impact Loading

Tests for anti-shear failure mechanism of CFRP-strengthened RC Beams without Stirrups under impact loading

Impact Testing of Reinforced Concrete Beams Shear-Strengthened with Fiber-Reinforced Polymer Wraps

Experimental Study of Mechanical Properties of CFRP under Different Strain Rates and Temperatures

Experimental Studies on Concrete Filled Steel Tubes under High Strain Rate Loading

Experimental Study on Dynamic Behavior of GFRP-to-concrete Interface

Experimental and numerical simulation study of fiber-reinforced high strength concrete at high strain rates

Fracture Property of Steel Fiber Reinforced Concrete at Early Age

Study on Shear Performance of Corroded Steel Fiber Reinforced Concrete Beams under Impact Load

Experimental Study on Dynamic Mechanical Performance of Post-Fire Concrete Confined by CFRP Sheets

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

Experimental Investigation on Strain Rate Effect of High-Performance Fiber Reinforced Cementitious Composites Subject to Dynamic Direct Tensile Loading

Influence of Steel Fiber on Dynamic Compressive Behavior of Hybrid Fiber Ultra High Toughness Cementitious Composites at Different Strain Rates

Experimental study and theoretical analysis on dynamic mechanical properties of basalt fiber reinforced concrete

Experimental and numerical study on tensile strength and failure pattern of high performance steel fiber reinforced concrete under dynamic splitting tension

A novel damage evaluation method for ultra‐high‐performance fiber reinforced concrete under multiple impact loads

Dynamic Compressive Strength Tests of Corroded SFRC Exposed to Drying–Wetting Cycles with a 37 mm Diameter SHPB

Experimental Study on Dynamic Splitting Characteristics of Carbon Fiber Reinforced Concrete