Abstract:It is important to note that an inappropriate design of the valve can generate noise and vibration, causing harmful effects on both personnel and equipment.However, the impact of geometric parameters of throttling elements on the internal flow mechanism of pressure reducing valves and their effect on pressure drop and Mach number is not yet clear. To address this gap, we employ both experimental and numerical methods to investigate the flow mechanism and its impact on pressure drop and Mach number for various geometrical parameters. With these insights, we conduct a sensitivity analysis and adopt the L 9 (3 4 ) orthogonal design method to optimize the design of the throttling components. The results demonstrate that steam flow within the MSLPRV operates in a supersonic regime. However, excessively high expansion coefficients (γ) can lead to structural changes that are too drastic, posing challenges for achieving stable pressure reduction and controlling the outlet Mach number within the flow channel. Moreover, we observe that the channel shape and outer wall radius ( R/DH ) exhibit a weak functional relationship with the pressure drop and Mach number. To ensure a reasonable pressure distribution within the labyrinth flow channels, it is crucial to adopt a smaller internal wall radius ( r/DH ) and appropriate channel depth( λ/DH ). Furthermore, under the same boundary conditions, increasing the number of stages (N) in the throttling components proves advantageous for achieving staged pressure reduction, thereby resulting in lower outlet Mach numbers and reduced kinetic energy within the flow channel. Finally, optimized design of labyrinth flow channels is achieved with expansion coefficients γ = 1.05, stage numbers N = 10, channel depths λ/DH=1.2 , and internal wall radius r/DH=0 .

Simulation for throttling effect of small aperture multistage orifice units

Numerical Simulation of flow characteristics in a new-type multistage nozzle of pressure drop

Experimental Study on Cavitation Resistive Property of Water Hydraulic Throttle Orifices

Steady Flow Torques in a Servo Motor Operated Rotary Directional Control Valve

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Numerical Simulation and Structure Improvement of Double Throttling in A High Parameter Pressure Reducing Valve

Throttling Components Effect on Aerodynamic Performance of Superheated Steam Flow in Multi-Stage High Pressure Reducing Valve

Computational fluid dynamics analysis on orifice structure inside valve core of pilot-control angle globe valve

Parametric Analysis on Throttling Components of Multi-Stage High Pressure Reducing Valve

Flow Rate Adjustable Ratio Analysis of a Novel Control Valve with Double Sleeve

Experimental and Numerical Investigation of Flow Forces in a Seat Valve Using a Damping Sleeve with Orifices

Experimental and numerical study of cavitation inside sharp-edged multi-hole orifice plate 1

Research on the Factors That Affect the Throttling Mouth Flow Coefficient of Spool Valve

Fluid Dynamics Analysis and Optimized Throttling Design of L-shaped Multi-Stage High Pressure Reducing Valve

Flow field simulation and establishment for mathematical models of flow area of spool valve with sloping U-shape notch machined by different methods

Numerical Simulation of Flow Field in Cut-off Valve with Throttle Orifice Based on CFD

Numerical Simulation of Inlet and Outlet Passages for Axial Flow Pump in Drainage Pump Station

Numerical Study On Temperature Field And Spool Deformation Of Throttle Slide Valve With V-Notches

Effects of the geometrical features of flow paths on the flow behaviour of a multi-stage labyrinth pressure reducing valve throttling components

Effects of Orifice on Pressure Difference in Pilot-Control Globe Valve by Experimental and Numerical Methods

Tapered Orifice Plate Flow Coefficient Research and Its Application in the Flow Measurement