Abstract:In recent years, LC resonant sensors have gained widespread attention for their extensive applications in industries such as pharmaceutical storage and food transportation. A wireless passive sensor with a good sensing performance is proposed based on a GO/CNT−OH/Nafion nanocomposite. The sensor was fabricated via inkjet printing technology, and the surface morphology of the GO/CNT−OH/Nafion nanocomposite was characterized by SEM measurement. It is found that the MWCNTs support the GO layer and the hydrophobic chains of Nafion interact with the hydrophobic layer of GO, resulting in a larger cavity and hydrophilic surface of the entire material. This structure well reflects the fact that the mixing of MWCNTs and Nafion provides the entire material with a stronger water absorption. The experimental study shows that the proposed humidity sensor has a frequency variation of 103 kHz/%RH at low humidity (30–60% RH) and a sensitivity of 931 kHz/%RH at high humidity (60–95% RH), while the sensitivity value from 30–95% RH is 547 kHz/% RH. The response time and recovery time are 110 s and 115 s, respectively. In addition, the tests showed that the GO/CNT−OH/Nafion nanocomposite applied to the humidity sensor had a maximum humidity hysteresis of about 3% RH at 30–95% RH, the resonant frequency remained basically unchanged after 50 h of testing, and the whole sensor possessed a good stability. After conducting several repeated experiments, it was found that the resonant frequency error of the whole sensor was low and did not affect the overall sensing test, which proved the reproducible preparation of the sensor. Finally, the humidity-sensing mechanism of the proposed sensor was analyzed in this paper, and it was found that GO enhanced the hygroscopic properties of GO/CNT−OH/Nafion nanocomposite when it was supported by MWCNT-OH and included uniformly dispersed Nafion. Therefore, our proposed humidity sensor is suitable for humidity detection above 30% RH in both sealed and open environments.

Carbon Nanotube Sensors Based on 555 Multivibrators

Multifunctional Conductive Copper Tape-Based Triboelectric Nanogenerator and As a Self-Powered Humidity Sensor

Nanocomposites of Carbon Nanotube (cnts)/cuo with High Sensitivity to Organic Volatiles at Room Temperature

Flexible and Highly Sensitive Humidity Sensor Based on Cellulose Nanofibers and Carbon Nanotube Composite Film.

Enhanced Humidity Sensing Performance of a Triple-Electrode Ionization Sensor Utilizing Carbon Nanotubes

Flexible UHF Resistive Humidity Sensors Based on Carbon Nanotubes

Humidity Sensitivity of Carbon Nanotube and Poly (dimethyldiallylammonium Chloride) Composite Films

Fast-speed, Highly Sensitive, Flexible Humidity Sensors Based on a Printable Composite of Carbon Nanotubes and Hydrophilic Polymers

Cellulose Nanofiber/Carbon Nanotube Dual Networks Enabled Humidity Sensor with High Sensitivity and Durability.

Humidity sensors based on the composite of multi-walled carbon nanotubes and crosslinked polyelectrolyte with good sensitivity and capability of detecting low humidity

Fabrication of Carbon-Nanotube Sheet Based Hydrogen Sensor

Research into Humidity Sensors Based on Multi-Wall Carbon Nanotubes

Flexible impedance sensor based on Ti3C2Tx MXene and graphitic carbon nitride nanohybrid for humidity-sensing application with ultrahigh response

An Excellent Humidity Sensor Made of Surface Acoustic Wave Resonator Coated with MWCNTs/Nafion Composite Material Films

A flexible tissue–carbon nanocoil–carbon nanotube-based humidity sensor with high performance and durability

A RESISTIVE-TYPE NANOSTRUCTURED HUMIDITY SENSOR PREPARED BY ELECTROSPINNING

A Cellulose Nanofiber Capacitive Humidity Sensor with High Sensitivity and Fast Recovery Characteristics

Toward Practical Gas Sensing with Rapid Recovery Semiconducting Carbon Nanotube Film Sensors

Sensitive and flexible humidity sensor based on sodium hyaluronate/MWCNTs composite film

A Printed Flexible Humidity Sensor with High Sensitivity and Fast Response Using a Cellulose Nanofiber/Carbon Black Composite

GO/CNT−OH/Nafion Nanocomposite Humidity Sensor Based on the LC Wireless Method