Abstract:Mini-channel heat sinks are popular in cooling high heat flux devices due to the high convective heat transfer performance associated with moderate pressure drop penalty. It is of great significance to further improve the thermal hydraulic performance in the mini-channel heat sink so as to adapt it to higher heat flux conditions. In this paper, a new method of realizing the optimized flow field to enhance the thermal hydraulic performance was carried out successfully in the mini-channel heat sink. The chosen mini-channel heat sink was 30 mm × 30 mm in substrate size with Reynolds number ranging from 100 to 1100. Through conjugate heat transfer optimization based on exergy destruction minimization principle, the optimized flow pattern was characterized by three pairs of longitudinal swirls flow. Subsequently, the inclined parallelepiped ribs were proposed to realize the optimized flow pattern in the mini-channel heat sink. The heat transfer enhancement mechanism was investigated by analyzing velocity distributions, temperature distributions, and heat convection intensity. Besides, the total thermal resistance was decreased and the exergy destruction minimization principle was verified. As a result, the variation ranges of Nu/Nu0, f/f0, efficiency evaluation criterion (EEC), and overall performance criterion (R3) were 1.35–5.92, 1.27–8.75, 0.68–1.12, and 1.31–4.22, respectively. The maximum average heat flux could achieve 3.2 × 106 W/m2 within a temperature difference of 60 K between substrate and fluid. The configured parameters pitch ratio (PR) and width ratio (WR) were recommended as 1 and 0.2, respectively. This work is conducive to the structural design of mini-channel heat sinks.

Study on Mini-Channel Structured Radiator Filled with Porous Media

Numerical Study on Performances of Mini-Channel Heat Sinks with Non-Uniform Inlets

Flow and Heat Transfer Performance of a Mini-Channel Radiator with Cylinder Disturbed Flow

Experimental Investigation of Convection Heat Transfer in Mini-Fin Structures and Sintered Porous Media

Heat Transfer and Pressure Drop Characteristics of Mini-Fin Structures

Experimental investigation of convection heat transfer in mini-fin structures and sintered porous

Experimental and Numerical Study on the Performances of Mini-Channel Heat Sinks

Turbulent heat transfer enhancement in the mini-channel by enhancing the original flow pattern with v-ribs

Experimental Investigation Of Convection Heat Transfer In Mini-Fin Structures

Conjugate heat transfer enhancement in the mini-channel heat sink by realizing the optimized flow pattern

A study of the heat transfer characteristics of the micro-channel heat sink

Numerical study on the heat transfer characteristics of hydrocarbon fuel in the cooling channel filled with porous media

NUMERICAL STUDY ON FLOW AND HEAT TRANSFER PERFORMANCE OF A NOVEL MULTILAYER MINI-CHANNEL HEAT EXCHANGER WITH LOW AXIAL HEAT CONDUCTION

Numerical Study of Enhanced Heat Transfer of MicroChannel Heat Sink with Nanofluids

Numerical study of different micro-channel structures on fluid flow and heat transfer performance

Thermal–hydraulic Performance of Small Scale Micro-Channel and Porous-Media Heat-Exchangers

Numerical simulation study of thermal and hydraulic characteristics of laminar flow in microchannel heat sink with water droplet cavities and different rib columns

Numerical Study on Temperature Uniformity in a Novel Mini-Channel Heat Sink with Different Flow Field Configurations

Study on the Flow and Heat Transfer in a Thermal Shielding Radiator

Experimental and numerical investigation on the heat transfer enhancement for Mini-channel heat sinks with tessellated fins

Numerical Study on Heat Transfer Efficiency and Inter-Layer Stress of Microchannel Heat Sinks with Different Geometries