Abstract:The effects of different alkali metal promoters in PdCl2-CuCl2/activated carbon (a.c.) catalyst on the reaction performance for synthesizing dimethyl carbonate (DMC) by gas-phase oxidative carbonylation of methanol were studied. The bulk and surface properties of catalyst PdCl2-CuCl2-CH3COOK/a.c. were characterized by XRD, XPS, and AAS techniques. On the basis of catalyst characterization and activity evaluation, the functions of promoters were further investigated, and the deactivation–regeneration of catalyst PdCl2-CuCl2-CH3COOK/a.c. was also discussed. The results show that the space time yield (STY) of DMC on catalysts with different alkali metal promoters ranks in the following order: K>Na>Li. The main reason for catalyst deactivation is the loss of chlorine. Fortunately, during the preparation of the catalyst, the interaction between CH3COOK and PdCl2 or CuCl2 that results in the formation of KCl limits the loss of chlorine. An obvious increase of the catalyst lifetime and catalytic activity is observed by treating fresh catalyst with a methanol solution of methyl chloroacetate. If deactivated catalyst is treated with a methanol solution of methyl chloroacetate in N2 stream at 200°C for 4h and then treated in N2 stream at 200°C for 2h, the catalytic activity can be restored effectively and the regeneration induction period can be shortened. The catalytic activity after two times of regeneration can still be restored to 93% of the fresh catalyst. The run time of this catalyst is up to 300h.

Effect of Chemical Treatment of Activated Carbon As a Support for Promoted Dimethyl Carbonate Synthesis by Vapor Phase Oxidative Carbonylation of Methanol over Wacker-type Catalysts

Impact of Preparation Strategy on the Properties of Carbon-Supported Wacker-type Catalysts in Vapor-Phase Dimethyl Carbonate Synthesis

Effect of Promoters on Structure and Performance of Activated Carbon-Supported Wacker-Type Catalysts for Synthesis of Dimethyl Carbonate

Effect of Nitric Acid Pretreatment on the Properties of Activated Carbon and Supported Palladium Catalysts

Effect of Surface Properties of Activated Carbon on CO Oxidation over Supported Wacker-type Catalysts

The effects of promoters on catalytic properties and deactivation–regeneration of the catalyst in the synthesis of dimethyl carbonate

Mesoporous Bimetallic Pdcl2-Cucl2 Catalysts for Dimethyl Carbonate Synthesis by Vapor Phase Oxidative Carbonylation of Methanol

Catalytic Performance of Cu_2(OH)_3Cl Catalysts Supported on Various Supports for Methanol Oxidative Carbonylation

Effect of Original Activated Carbon Support and the Presence of NOx on CO Oxidation over Supported Wacker-type Catalysts

Advances in the Catalysts for Synthesis of Dimethyl Carbonate (DMC) Via Liquid-Phase Oxidative Carbonylation of Methanol

Research on the direct oxidation and carbonylation of vapor phase methanol for DMC production

Advances in Dimethyl Carbonate Synthesis by Gas-Phase Oxidative Carbonylation of Methanol

Synergistic effect of the framework boron and Al-rich region to enhance the metal-support interaction for boosting Pd-based catalyst activity of dimethyl carbonate synthesis

Synthesis of DMC by Oxidative Carbonylation of Methanol

Study on the synthesis of dimethyl carbonate with active carbon supported palladium catalysts

Pd Catalyst Supported on Activated Carbon Honeycomb Monolith for CO Oxidation and the Application in Air Purification of Vehicular Tunnel

Boosting the catalytic activity via acid-base synergistic effect for CO2 and methanol direct to dimethyl carbonate

Direct Oxidative Carbonylation Of Vapor Phase Methanol To Dimethyl Carbonate By Cucl2/C Catalysts

Copper nanoparticles control of carbon supported copper catalysts for dimethyl carbonate synthesis: A short review

Highly efficient super activated carbon supported ultra-low loading copper catalyst for the oxidative carbonylation of methanol to dimethyl carbonate

Mechanistic Investigation of Dimethyl Carbonate Synthesis Over Palladium Chloride Catalyst