Abstract:The layered rock mass widely exists in mining, construction, transportation, and water conservancy projects, and the damage phenomena of plate crack and spalling often occurs in the process of coal and rock dynamic disaster in deep mining. Therefore, the rock mass nearby excavation surface is usually considered to be composed of layers of thin plate rock mass to reveal the damage and failure mechanism of rock mass. In the whole dynamic process of mining and coal and rock dynamic disaster, rock mass would bear the dynamic disturbance from mine earthquake, and at present, the mechanical characteristics of rock mass are mainly studied under static load, while dynamic mechanical response characteristics and the mechanisms of dynamic damage, failure, and disaster-causing are still unclear. This study mainly focused on the dynamic response characteristic and failure mechanism of rock mass based on a rectangular thin plate model. The frequency equations and deflection equations of the thin plate rock mass with different boundary conditions (S-F-S-F, S-C-S-C, and C-C-C-C) were established under free vibration by the thin plate model and the dual equation of the Hamilton system, and the deflection equations under impact load were derived based on the Duhamel integral. And then, the effective vibration modes of the thin plate rock mass with different boundary conditions and their natural frequencies were obtained by Newton’s iterative method. Based on the third-strength theory and the numerical simulation results by LS-DYNA, the maximum shear of the effective vibration modes and the processes of damage and failure under impact load were analyzed. The research results showed that the initial position of damage and failure may be determined by effective vibration mode with the lowest frequency; the develop tendency of which by the combined actions of other effective vibration modes and the effective vibration modes with lower frequency could have greater influence on the process of damage and failure of the thin plate rock mass, which are beneficial to revealing the mechanism of coal and rock dynamic disaster.

Impact dynamic simulation for an extra-large engineering vehicle FOPS subjected to a drop hammer

Rock-Breaking Mechanism Study of Axial and Torsional Impact Hammer and Its Application in Deep Wells

Development of Structural Testing Equipment for Impact and Complex Loading

The Dynamic Response and Failure Model of Thin Plate Rock Mass under Impact Load

Dynamic Damage Process of an Underground Protective Structure Subjected to Impact Loading

Cumulative Damage Study of Air-Dropped Vehicles with Multiple Drops Impact

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

Multiple Impact Phenomenon in Impact Hammer Testing: Theoretical Analysis and Numerical Simulation

Experimental and numerical investigation on impact and post-impact behaviours of H-shaped steel members

Experiment and numerical simulation of thin-walled cylindrical containers subjected to lateral impact

Impact resistance performance and simplified calculation method of web-opened steel beams under impact loads

Peridynamics simulation of structural damage characteristics in rock sheds under rockfall impact

Simulation of Automobile Offset Frontal Impact and Structure Improvement

Dynamic parameters of multi-cabin protective structure subjected to low-impact load – Numerical and experimental investigations

Experimental Research on Dynamic Behavior of Stiffened Plates under Drop-Weight Impacts of a Wedge Impactor

Field Test and Numerical Modeling of Vehicle Impact on a Boulder with Impact-Induced Fractures

Numerical and experimental study on the design strategy of a new collapse zone structure for railway vehicles

FEM Simulation Analysis on the Impact Force of Impact Crusher

Parametric study on composite beam with various connections under mid-span impact scenarios

Study on dynamic response of cushion layer-reinforced concrete slab under rockfall impact based on smoothed particle hydrodynamics and finite-element method coupling

Research on the comparison of impact resistance characteristics between energy absorption and conventional hydraulic columns in fluid–solid coupling