Influence of Operating Parameters on NOx and SO2 Emissions in Circulating Fluidized Bed with Post-Combustion
Chao Wang,Guoliang Song,Rui Chen,Yu Jiang,Qinggang Lyu
DOI: https://doi.org/10.1007/s11630-023-1856-1
IF: 2.013
2023-07-30
Journal of Thermal Science
Abstract:Post-combustion technology of circulating fluidized bed can largely reduce the emission of nitrogen oxides (NO x ) in the process of combustion and succeed in meeting the ultra-low NO x standard for some fuels like Shenmu coal. Exploring the potential of synergistic control of the emissions of NO x and sulphur dioxide (SO 2 ) under post-combustion technology has become a direction that needs further study. The experiments were conducted on a 0.1 MW (thermal) circulating fluidized bed (CFB) test platform, composed of a CFB main combustor and post-combustion chamber (PCC). The paper focuses on the effects of air distribution ratio and temperature in CFB and limestone addition on NO x and SO 2 emissions. The experimental results showed that compared with traditional CFB combustion, post-combustion technology can reduce NO x emission largely, but lead to a slight increase in SO 2 emission. The higher SO 2 emissions at post-combustion can lead to less NO x emission. With the decrease in λ CFB , NO x emission first decreased and then increased; by contrast, SO 2 emission with λ CFB first increased and then decreased. Under post-combustion, when λ CFB was 0.9, NO x emission was the minimum, while the SO 2 emission was the largest. Combustion temperature and limestone addition has less adverse effects on NO x emission under post-combustion, compared with traditional CFB combustion. Limestone injection into the furnace is applicable under post-combustion, and the sulfur removal efficiency under post-combustion is very high, almost equivalent to that under traditional combustion.
engineering, mechanical,thermodynamics