Abstract:The incorporation of supplementary cementitious materials (SCMs) in concrete can improve the properties of concrete partially immersed in salt solution. However, the current partial immersion environment only considers the capillary action above the still water level, does not consider the capillary action above the fluctuating water level in dry-wet cycling environment. In this paper, a series of indoor exposure experiments were carried out to investigate the effects of incorporating polynary SCMs including fly ash (FA), ground granulated blast furnace slag (GGBFS) and silica fume (SF) on the sulfate resistance and chloride impermeability of concrete considering the capillary action above the fluctuating water level in dry-wet cycling environment. A total of 15 groups of concrete with different mix proportions (total 150 concrete specimens) were designed to study the effects of different replacement levels of polynary SCMs on concrete properties. The effects of incorporating polynary SCMs on the chloride impermeability of concrete above and in the fluctuating water level zone were investigated. The scanning electron microscope (SEM), x-ray diffraction (XRD) and mercury intrusion porosimetry (MIP) tests were used to analyze the microstructure of concrete. The results indicate that when concrete is incorporated with polynary SCMs and subjected to capillary action above the fluctuating water level, the compressive strength and chloride impermeability first increase and then decrease with the increase of FA content; the compressive strength and chloride impermeability decrease with the increase of GGBFS content; the compressive strength first increase and then decrease with the increase of SF content, and the chloride impermeability increase with that. The transport process of chloride in concrete above the fluctuating water level zone includes the longitudinal transport under capillary action and the transverse transport under concentration gradient action. The combined effects of both cause the higher chloride concentration in concrete above the fluctuating water level zone. Comprehensively considering the influence of different mix proportions on the sulfate resistance and chloride impermeability of concrete, it is determined that 20% FA + 5% SF is the optimal replacement level with the excellent performance considering the capillary action above the fluctuating water level in dry-wet cycling environment.

EFFECTS OF STONE DUST ON RESISTANCE TO CHLORIDE ION PERMEATION AND RESISTANCE TO FREEZING OF MANUFACTURED SAND CONCRETE

EFFECTS OF MICRO-FINES ON DURABILITY OF MANUFACTURED SAND CONCRETE

Effect of Stone Powder Content on the Diffusing Parameter and Diffusion Attenuation Coefficient of Chloride Ion of Mechanical Sand Concrete

Effects of incorporating polynary SCMs on sulfate resistance and chloride impermeability of concrete considering capillary action in dry-wet cycling environment

Influence of Initial Saturation Degree on Chloride Transport in Concrete under Hydraulic Pressure

Study on Durability of Manufactured Sand Based on Stone Powder Content

Influence of Stone Powder Content from Manufactured Sand Concrete on Shrinkage, Cracking, Compressive Strength, and Penetration

Effect of modified supplementary cementitious material on performance of mortar and concrete in marine environment

Mechanical Properties and Chloride Penetration Resistance of Concrete Combined with Ground Granulate Blast Furnace Slag and Macro Synthetic Fiber

EFFECTS OF DESERT SAND SUBSTITUTION ON CONCRETE PROPERTIES USING DESERT SAND-DOPED QUARTZ SAND AS THE FINE AGGREGATE

Feasibility and Application of Concrete Containing Chloride-rich Offshore Sand

Effects of Fines Content on Durability of High-Strength Manufactured Sand Concrete

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Impact of Stone Powder Content on Corrosion Resistance in Reinforced Concrete under Stray Current and Chloride Interactions

Chloride ion penetration resistance of concrete containing fly ash and silica fume against combined freezing-thawing and chloride attack

Effect of Chlorine Salt on Durability of Mineral Admixture Concrete under Different Conditions

Influence of MB-value of Manufactured Sand on the Shrinkage and Cracking of High Strength Concrete

Investigating the effects of seawater and sea sand aggregates and supplementary cementitious materials on the early shrinkage and crack resistance of concrete

Effects of w/b ratio, fly ash, limestone calcined clay, seawater and sea-sand on workability, mechanical properties, drying shrinkage behavior and micro-structural characteristics of concrete

Effect of concrete wet packing density on the uni‐axial strength of manufactured sand CFST columns

Chloride Ion Diffusion Performance of Concrete and Its Influence on Scour Resistance