Abstract:Here we demonstrate the use of microstereolithography (MSL), a 3D direct manufacturing technique, as a viable method to produce small-scale microfluidic components for electrochemical flow detection. The flow cell is assembled simply by resting the microfabricated component on the electrode of interest and securing with thread! This configuration allows the use of a wide range of electrode materials. Furthermore, our approach eliminates the need for additional sealing methods, such as adhesives, waxes, and screws, which have previously been deployed. In addition, it removes any issues associated with compression of the cell chamber. MSL allows a reduction of the dimensions of the channel geometry (and the resultant component) and, compared to most previously produced devices, it offers a high degree of flexibility in the design, reduced manufacture time, and high reliability. Importantly, the polymer utilized does not distort so that the cell maintains well-defined geometrical dimensions after assembly. For the studies herein the channel dimensions were 3 mm wide, 3.5 mm long, and 192 or 250 pm high. The channel flow cell dimensions were chosen to ensure that the substrate electrodes experienced laminar flow conditions, even with volume flow rates of up to 64 mL min(-1) (the limit of our pumping system). The steady-state transport-limited current response, for the oxidation of ferrocenylmethyl trimethylammonium hexaflorophosphate (FcTMA(+)), at gold and polycrystalline boron doped diamond (pBDD) band electrodes was in agreement with the Levich equation and/or finite element simulations of mass transport. We believe that this method of creating and using channel flow electrodes offers a wide range of new applications from electroanalysis to electrocatalysis.

Femtoliter and attoliter electrochemical cells on chips.

Electrochemical Reactions in Subfemtoliter-Droplets Studied with Plasmonics-Based Electrochemical Current Microscopy.

Electrochemistry in Nanoscopic Volumes.

Accelerating Electrochemical Reactions in a Voltage‐Controlled Interfacial Microreactor

A New Microfluidic Electrochemical Cell And Application For Chip Flow Biosensor

Recent Advances in the Determination of Intracellular Contents in Individual Cells Using Microfluidic Devices

Improved conversion rates in drug screening applications using miniaturized electrochemical cells with frit channels.

Microelectrode Electrochemistry with Semiconducting Microelectrode Chips

Soi Substrate-Based Microfluidic Chip For Cell Electrofusion

10.1063/5.0083713.1

Electrokinetically induced concentration of diluted sample by liquid metal embedded microfluidic chip

Study of High-Throughput Cell Electrofusion in a Microelectrode-Array Chip

Microfabrication of A Digital Microfluidic Platform Integrated with an On-Chip Electrochemical Cell

Chemical cytometry on a picoliter-scale integrated microfluidic chip

A Rapidly Fabricated Microfluidic Chip for Cell Culture.

Fabrication of a Novel Liquid Metal Microelectrode in Microfluidic Chip

Angstrom-Scale Electrochemistry at Electrodes with Dimensions Commensurable and Smaller than Individual Reacting Species

Fabrication of Versatile Channel Flow Cells for Quantitative Electroanalysis Using Prototyping

The practice of reaction window in an electrocatalytic on-chip microcell

Microfabricated Electrochemical Cell-Based Biosensors for Analysis of Living Cells In Vitro

A cell electrofusion microfluidic chip using discrete coplanar vertical sidewall microelectrodes.