Development of Woven Fabrics with High-Count andCooling Collagen
K. Cheng,J. Huang,Fl Huang,Blended Yarns
2018-12-14
Abstract:The development, manufacture and design of Taiwan’s functional home bedding fiber products, main problem lies in the functional design of the bedding fiber products, fashion design, cost assessment and comfort. The advantages of cotton fiber made bedding products include good water absorption and air permeability. However, there are disadvantages of large shrinkage rate and wrinkle after washing. The advantages of polyester fiber made bedding products include not easy to wrinkle and shrink, and high heat resistance, but it is easy to generate static electricity and contaminate dust and has the disadvantage of being stuffy when used. The advantages of cellulose series fiber-made bedding products included better moisture absorption and dyeing, which are suitable for blending with other fibers such as polyester, and polyamide, but it is easy become longer after hanging, easy to shrink after laundry, and dry cleaning is required. The advantages of acrylic fabrics fiber made home bedding products, included nonwrinkle, better chemical resistance, sunlight resistance and thermal insulation, but have the disadvantages of easy raising, worse heat resistance and sultry heat in summer. Especially on the printed cloth, it is not suitable for the strong sunlight. Due to long-term sunlight radiation, it will cause the pattern on the fabric to fade. It is recommended to install it in a cool and ventilated place in the house. The jacquard woven fabric was weaved according to the predesigned pattern, which is visually elegant and textured. Therefore, it is suitable for installation in the bedroom, study, and elder room are also high-priced products. The long-term use of home Abstract The 60’s cooling collagen viscose rayon blended yarn was fabricated by using ring spinning system. The blended yarn constitutions included 50wt% of regular viscose rayon with 1.5d and 38mm, 35wt% of cooling viscose rayon with 1.25d and 38mm, and 15 wt% of collagen viscose rayon fibers with 1.5d and 38mm. As mension above 60’s cooling collagen viscose rayon ring yarn was used as filling yarn. The 60’s Model Rayon(60wt%) ring yarn was used as warp yarns. The grey cloth specifications included warp density 198 ends/ 2.54cm and filling density 146 picks/2.54cm as well as the fabric width is 170cm which was produced by Picanol air-jet shuttleless loom. From the experimental results, the finished woven fabric was fabricated throuth souring, bleaching, dyeing, finishing, and heat setting processes. The color fastness of woven fabrics with high-count and cooling collagen achieved grade 4-5 according to CNS1494 testing standard.
Materials Science