Abstract:A new type of steel-concrete-steel composite structure was adopted and widely used in the immersed tunnel of the Shenzhen-Zhongshan access. The research on the mechanical behavior of the new composite structure under a high temperature of fire is of great engineering significance to the fire protection design of the structure. Both the model test and a numerical simulation were adopted to study the mechanical behavior and damage characteristics of the new composite structure under fire. The RABT standard temperature rise curve was used to simulate the temperature rising law under fire (it reflects the characteristics of temperature rise in case of fire in an enclosed environment: rapidly raised to 1200 °C within 5 min, maintained at 1200 °C for 120 min, then it is cooled to normal temperature after 110 min). The temperature distribution law inside the structure, the deformation development law of the roof and the crack distribution were analyzed based on the thermal-mechanical coupling analysis method. The results showed that the internal part of the composite structure close to the fire surface was directly affected by the high temperature, and the temperature presented a step distribution law, while the part far from the fire surface was affected by the lag effect of the temperature transfer, and the temperature presented a continuous growth law. The roof deformation presented a three-stage model of "rapid growth-deformation stability-deformation recovery" with time. The overall cracks of the composite structure showed a symmetrical distribution under fire. The composite structure presented a shear failure mode as a whole. The results could provide a reference for the study of fire resistance for the new composite structure and support the structural fire protection design of the immersed tunnel of the Shenzhen-Zhongshan access.

Performance-based fire resistance design and analysis of high-rise steel towers

STUDY ON PERFORMANCE-BASED FIRE-RESISTING DESIGN AND KEY TECHNOLOGIES FOR LARGE SPATIAL STEEL STRUCTURES

Fire Behavior and Performance of Concrete-Filled Steel Tubular Columns: Review and Discussion

Studies on performance-based fire-resisting design method for large-space structures

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

Analysis on fire-resisting performance-based design method and engineering instances for large-space structures in China

PERFORMANCE-BASED ANTI-COLLAPSE ANALYSIS OF THE LARGE-SPACE STEEL LATTICE TRUSS STRUCTURE UNDER FIRE

An Integrated Model for the Fire Safety Analysis of Large Space Buildings

Analysis On Global Mechanics Properties Of Large-Space Steel Structures Under Fire Conditions

The mechanical response analysis of a super tall concrete structure under fire

FIRE RESISTANCE DESIGN OF STEEL-CONCRETE COMPOSITE STRUCTURES

Performance of Concrete-Filled Steel Tubular Column-Wall Structure Subjected to ISO-834 Standard Fire: Analytical Behaviour

Analysis on resistance on and after exposure to standard fire of short centrifuge concrete-filled steel tubular colunms

Overall Buckling Behavior of Fire-Resistant Steel Welded I-section Columns under Ambient Temperature

Fire Performance of Concrete Filled Steel Tubular Beam-Columns

Performance-based Analysis of the Steel Structure Fire Protection of the Bulk Warehouse

Research on Mechanical Behavior of the Steel-Concrete-Steel Composite Structures Subjected to High Temperature of Fire

On the fire hazard identification in the performance-based fire protection design in large scale buildings

Simulation and Early Warning Design of Fire Resistance Characteristics of Steel Structure Towers for High Voltage Transmission Lines

Fire Performance and Design Method of Steel Reinforced Concrete(SRC) Columns

Temperature Distribution Analyses Of Composite Steel-Concrete Columns Under Natural Fire