Abstract:As the current mainstream high-precision ADC architecture, sigma-delta ADC is extensively employed in a wide range of domains and applications. This paper presents the design of a highly efficient cascaded digital decimation filter for sigma-delta ADCs, emphasizing the suppression of high folding band noise and the achievement of a flat passband. Additionally, this study addresses the critical balance between filter performance and power consumption. An inserting zero (IZ) filter is incorporated into a cascaded integrator comb (CIC) filter to enhance aliasing suppression. The IZ filter and compensation filter are optimized using the particle swarm optimization (PSO) algorithm to achieve greater noise attenuation and smaller passband ripple. The designed filter achieves a noise attenuation of 93.4 dB in the folding band and exhibits an overall passband ripple of 0.0477 dB within a bandwidth of 20 KHz. To decrease the power consumption in the filter design, polyphase decomposition has been applied. The filter structure is implemented on an FPGA, processing a 5-bit stream from a 64-times oversampling rate and third-order sigma-delta modulator. The signal-to-noise ratio (SNR) of the output signal reaches 91.7 dB. For ASIC design, the filter utilizes 180 nm CMOS technology with a power consumption of 0.217 mW and occupies a layout area of 0.72 mm2. The post-layout simulation result indicates that the SNR remains at 91.7 dB.

Improved High Performance Cascaded Integrator Comb Filter

Design and Implementation of a Modified High Performance and Low Power CIC Interpolation Filter

Low Power and High Speed Designs of CIC Filter for Sigma-Delta ADCs

On-Chip Implementation of Cascaded Integrator Comb filters (CIC) for DSP applications

Miniaturized and High-Selectivity Substrate Integrated Waveguide (SIW) Bandpass Filter Loaded by Complementary Split-Ring Resonators (Csrrs)

VLSI Implementation of Cascaded Integrator comb filters for DSP applications

Decimation Filter Design in Sigma-delta ADC

An Improved Wideband CIC Filter Design of Software Radio Receivers

Implementation and design of multifunction filter using multiply-output CCII

An Enhancement of Decimation Process using Fast Cascaded Integrator Comb (CIC) Filter

Improvement of Siw Filter Upper Stopband Performance Using Bypass Coupling Substrate Integrated Circular Cavity (Sicc)

A COMPACT MULTILAYER DUAL-MODE SUBSTRATE INTEGRATED CIRCULAR CAVITY (SICC) FILTER FOR X-BAND APPLICATION

Integrated Broadband Filter with Sharp Transition Edges Based on SiN and SiON Composite Waveguide Coupler

Design of Improved Decimation Filter

Design of a Sigma-Delta Analog-to-Digital Converter Cascade Decimation Filter

A Down-Sample Design under Special Condition in High-Speed All-Digital System

Analysis and Design of Band-Pass Filter Based on Cascaded Mach-Zehnder Interferometers

The Design of Cascaded Mach-Zehnder Interferometer Filter Based on Digital Filter Technique

Fully integrated universal MOSFET-CCCII continuous time filter implementation

A Low-Frequency Filter in Inertial Applications

Compact Hybrid Filter based on HMSIFW and SICL Technology with Wide-Stopband Suppression