Abstract:As the current mainstream high-precision ADC architecture, sigma-delta ADC is extensively employed in a wide range of domains and applications. This paper presents the design of a highly efficient cascaded digital decimation filter for sigma-delta ADCs, emphasizing the suppression of high folding band noise and the achievement of a flat passband. Additionally, this study addresses the critical balance between filter performance and power consumption. An inserting zero (IZ) filter is incorporated into a cascaded integrator comb (CIC) filter to enhance aliasing suppression. The IZ filter and compensation filter are optimized using the particle swarm optimization (PSO) algorithm to achieve greater noise attenuation and smaller passband ripple. The designed filter achieves a noise attenuation of 93.4 dB in the folding band and exhibits an overall passband ripple of 0.0477 dB within a bandwidth of 20 KHz. To decrease the power consumption in the filter design, polyphase decomposition has been applied. The filter structure is implemented on an FPGA, processing a 5-bit stream from a 64-times oversampling rate and third-order sigma-delta modulator. The signal-to-noise ratio (SNR) of the output signal reaches 91.7 dB. For ASIC design, the filter utilizes 180 nm CMOS technology with a power consumption of 0.217 mW and occupies a layout area of 0.72 mm2. The post-layout simulation result indicates that the SNR remains at 91.7 dB.

A Down-Sample Design under Special Condition in High-Speed All-Digital System

Decimation Filter Design in Sigma-delta ADC

Optimization Of Sample/Hold Circuit For High-Speed And High-Resolution Adcs

Improved Design Scheme of High Accuracy Harmonic Detection Based on DSP

Design and Implementation of a Modified High Performance and Low Power CIC Interpolation Filter

New Design of Digital Down-Converter

Design Method of High Performance Digital Low-Pass Filter in Harmonic Detection Algorithm

High Digitalized Resolution and Low Switching Loss for High Power Electronics Converters Based on Multisampling Technology

Low Power Design For Fir Filter

An Optimized Design for a Decimation Filter and Implementation for Sigma-Delta ADC

Low Resource Consumption Design of Digital Decimation Filter

A Highly Efficient Digital Down Converter in Wide Band Digital Radar Receiver

Design of a Sigma-Delta Analog-to-Digital Converter Cascade Decimation Filter

Design and FPGA Implementation of a Reconfigurable Digital Down Converter for Wideband Applications.

Design and Optimization of Decimation Filter in Σ-Δ A/D Converter

Low Power and High Speed Designs of CIC Filter for Sigma-Delta ADCs

Design of a low-pass digital filter for 18-bit ΣΔA/D converter

On-Chip Implementation of Cascaded Integrator Comb filters (CIC) for DSP applications

Design of an adaptive signal shaping filter in high dynamic measurement systems

The Design and Implementation of Fir Filter Based on Improved Da Algorithm

Wideband Sample Rate Converter Using Cascaded Parallel-serial Structure for Synthetic Instrumentation