Abstract:Purpose - As arc suppression coils (ASCs), magnetically controlled reactors (MCRs) are usually operated in the single-phase mode. Due to the lack of a third order harmonic compensation circuit, the current harmonics are high. The purpose of this paper is to propose a novel structure of MCR and a genetic algorithm (GA) to determine the parameters which will result in minimum total harmonics. Design/methodology/approach - This paper proposes the structure and the working principle of the multi-valve controlled saturable reactor (MCSR). There are several sorts of magnetic valves in the iron cores of the MCSR. The saturation degree of each magnetic valve is different when the same direct component of the magnetic flux is generated in the iron core, therefore current harmonics of different phases emerging, i.e. the total harmonics can be reduced. The magnetization characteristics and the mathematical model of the current harmonics of the MCSR are presented by introducing three parameters. The optimal values of the parameters that result in the smallest total harmonic distortion in the output current are calculated by a GA. Findings - The simulation and experimental results are coincident with the theoretical analyses, which prove the effectiveness of the proposed method on harmonic suppression. Practical implications - The method proposed in this paper can successfully reduce the current harmonics of the conventional MCR, including but not limited to the ASC. A prototype MCSR (540 kVA/10 kV) has been designed and constructed. Originality/value - In this paper, a MCSR is proposed. The mathematical model of the MCSR for harmonic analysis is developed. The optimal parameters that result in the smallest THD in the output current are calculated. The mathematical model can be also used for the harmonic analysis of conventional MCRs.

New Method to Study Arc-suppression Coil with Magnetic Bias Based on Free Even-order Harmonic Principle

A Continuously Magnetic Valve Arc-Suppression Coil and Its Modeling

Analysis and Optimized Suppression of DC Bias in Large AC Power Grid

Harmonic Currents Injection Strategy with Optimal Air Gap Flux Distribution for Multiphase Induction Machine

A Coil Structure Optimal Method Based On Vertical Coupling For Inductive Power Transfer

A Study on the Method of Temperature Distribution Control in Electromagnetism Induction Heating

Steady-State and Transient DC Magnetic Flux Bias Suppression Methods for a Dual Active Bridge Converter

A multi-valve controlled saturable reactor and its harmonic optimization

A Novel Continuously Adjustable Magnetic-valve Controllable Reactor and Its Modeling

Magnetic Flux Bias Compensation Based on Voltage Injection Method With an Auxiliary DC/DC Converter

An Analog-based, Duty Cycle Modulation Method to Remove the DC Bias in the Transformer for a Dual Active Bridge Converter

A magnetic-mechanical strong coupling FEM model and vibration characteristic analysis of transformer core under DC bias

A Comprehensive Coupled Methodology for Calculation and Suppression of DC Bias in UHVDC Transmission Systems

Bias Magnetic Field Optimization of Longitudinal Modes Guided Wave Sensor Based on Magnetostriction

Improved Design of Automatic Tuning Arc Suppression Coil with Thyristor Series Capacitors

Experimental Study On Dc Biasing Impact On Transformer'S Vibration And Sound

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Finite Element Analysis and Optimization for Magnetic Circuit System of Moving-Coil Linear Compressor

A method for reducing the influence of external field on sample current by adding bias voltage

DC Arc Numerical Calculations and Experimental Researches Based on the Arcing Horn Used in Over-head Line

Improved Secant Method for Getting Proper Initial Magnetization in Transformer DC Bias Simulation