Abstract:DD6 single-crystal superalloy is a crucial structural material widely employed in aerospace, energy, and petrochemical industries. High-temperature creep resistance is a critical indicator for evaluating alloys. In this study, a creep lifetime prediction model for DD6 single-crystal alloy was established based on high-temperature creep equations and creep deformation data. By combining theoretical modeling and finite element simulation, a method for predicting the creep behavior of MCrAlY-coated DD6 single crystal alloy was proposed, and the influence of oxide layer thickness and inner wall temperature of thin-walled hollow structures on the second-stage steady-state creep strain rate in the substrate danger zone was investigated. The predictive capability of the model was validated through experiment. The research results indicate that the MCrAlY coating has a minimal impact on the high-temperature creep lifetime of [001]-oriented DD6 single-crystal superalloy. Pre-exposure treatment thickens the initial oxide layer of the coating, effectively extending the creep lifetime of the coated alloy, particularly at higher temperatures and stress levels. This underscores the effectiveness of pre-exposure treatment in increasing the creep lifetime of the MCrAlY-coated DD6 single-crystal superalloy system. The influence of inner wall temperature in thin-walled hollow structures on creep lifetime follows a parabolic pattern. Excessively low inner wall temperatures reduce creep lifetime due to significant thermal mismatch stresses, while excessively high inner wall temperatures decrease creep lifetime because of changes in material properties at those temperatures. The proposed model provide valuable insights into the creep lifetime prediction of [001]-oriented DD6 single-crystal superalloy with an MCrAlY coating.

Creep Behavior of Plasma Sprayed Nicr and Nicral Coating-Based Systems

Unveiling the Microstructure Evolution and the Short-Time Tensile Creep Behavior in the CuCrZr Alloy

Creep Behaviours of Cr25Ni35Nb and Cr35Ni45Nb Alloys Predicted by Modified Theta Method

Performance of Protective Compound Coating for НЦy Niobium Alloy Evaluated by Thermo-Cyclic Creep Test Method

Study on creep characteristics and the isochronous stress–strain curve of Ni-Cr-Mo superalloy

Creep life modelling of nickel-based single crystal superalloy DD6 with MCrAlY coating

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

In Situ SEM Study of Creep Deformation Behavior of Nickel-Based Single-Crystal Superalloys

Structural Characteristics and Evolution in the Crack Propagation Process of NiCrAlY/YSZ Gradient Coatings Through Thermal Shock at 900 °C

Diabetic retinopathy as a predictor of late clinical events following percutaneous coronary intervention.

Study of the Creep Behavior of Nickel-Based Single Crystal Superalloy Micro Specimens with Dimensional Effects

Coating-assisted deterioration mechanism of creep resistance at a nickel-based single-crystal superalloy

Effect of Spray Method and Sprayed Material on Creep Behavior of MCrAlY Coating

Improved Oxide Spallation Resistance of Microcrystalline Ni-Cr-Al Coatings

Creep behaviour and microstructural evolution of Al x CrMnFeCoNi high-entropy alloys

Tensile, Creep Behavior and Microstructure Evolution of an As-Cast Ni-based K417G Polycrystalline Superalloy

Microstructure and tribological behavior of plasma spray Ni60 alloy coating deposited on ZL109 aluminum alloy substrate

Microstructural Charactistics of Plasma Sprayed NiCrBSi Coatings and Their Wear and Corrosion Behaviors

Environmental Effects on the Creep Response of Thin-Walled Ni-Based Single Crystal Superalloys

Experimental investigation on creep strengthening phenomenon of a Ni-based single crystal superalloy under cyclic loading and unloading conditions

High temperature creep of precipitation-strengthened Ni3Al-based alloy