Abstract:Two-dimensional molybdenum disulfide (MoS2) has attracted significant attention for next-generation electronics, flexible devices, and optical applications. Chemical vapor deposition is the most promising route for the production of large-scale, high-quality MoS2 films. Recently, the chemical vapor deposition of MoS2 films on soda-lime glass has attracted great attention due to its low cost, fast growth, and large domain size. Typically, a piece of Mo foil or graphite needs to be used as a buffer layer between the glass substrates and the CVD system to prevent the glass substrates from being fragmented. In this study, a novel method was developed for synthesizing MoS2 on glass substrates. Inert Al2O3 was used as the buffer layer and high-quality, uniform, triangular monolayer MoS2 crystals with domain sizes larger than 400 μm were obtained. To demonstrate the advantages of glass/Al2O3 substrates, a direct comparison of CVD MoS2 on glass/Mo and glass/Al2O3 substrates was performed. When Mo foil was used as the buffer layer, serried small bilayer islands and bright core centers could be observed on the MoS2 domains at the center and edges of glass substrates. As a control, uniform MoS2 crystals were obtained when Al2O3 was used as the buffer layer, both at the center and the edge of glass substrates. Raman and PL spectra were further characterized to show the merit of glass/Al2O3 substrates. In addition, the thickness of MoS2 domains was confirmed by an atomic force microscope and the uniformity of MoS2 domains was verified by Raman mapping. This work provides a novel method for CVD MoS2 growth on soda-lime glass and is helpful in realizing commercial applications of MoS2.

A Simple Chemical Method for the Deposition of Highly Crystallized Srmoo4 Films

Unique photoluminescence properties of highly crystallized BaMoO4 film prepared by chemical reaction

Controllable synthesis of hierarchical strontium molybdate by sonochemical method

Chemical Solution Processing and Properties of Sr2FeMoO6 Thin Films

Conductive single-phase SrMoO3 epitaxial films synthesized in pure Ar ambience via plasma-assisted radio frequency sputtering

Morphology-Controlled Synthesis of Pbmoo4 Crystals by A Simple Sonochemical Method

Molecular Beam Epitaxy Of Highly Crystalline Monolayer Molybdenum Disulfide On Hexagonal Boron Nitride

Novel electrochemical technique: Grain control in preparation of polycrystalline BaMoO4 film

High UV Transparent Conductivity of SrMoO3 Thin Films

Controlled Synthesis of CaMoO<sub>4</sub> and SrMoO<sub>4</sub> Rods by a Simple Sonochemical Method

Electrodeposition of SrF2 and rare earth doped SrF2 films and its optical properties

Room temperature synthesis of crystallized luminescent SrWO4 films by an adjustable galvanic cell method

Properties of Sr2FeMoO6 Thin Films Fabricated by the Chemical Solution Deposition Method

Aqueous mineralization process to synthesize uniform shuttle-like BaMoO4 microcrystals at room temperature

A Simple Aqueous Mineralization Process to Synthesize Tetragonal Molybdate Microcrystallites

Growth and optical properties of transparent CaMoO4 films by chemical solution deposition on Si and glass substrates

Epitaxial Optimization of Atomically Smooth Sr3Al2O6 for Freestanding Perovskite Films by Molecular Beam Epitaxy

Morphology and Crystal Phase Control in Preparation of Highly Crystallized BaWO4 Film Via Galvanic Cell Method

Chemical Vapor Deposition of Uniform and Large-Domain Molybdenum Disulfide Crystals on Glass/Al2O3 Substrates

Analyzing Growth Kinematics and Fractal Dimensions of Molybdenum Disulfide Films

Selective Synthesis and Luminescence Properties of Self-Assembled Srmoo4 Superstructures Via A Facile Sonochemical Route