Abstract:Fluoropolymer films have so low surface energy that they have good special surface properties, such as water-resistant, oil-resistant and self-cleaning properties. Nowdays, surface properties of polyacrylates can be modified by introducing fluorine-containing groups to polymer chains. The acrylate copolymer emulsion containing fluorine was prepared, with fluoromoner ( Zonyl TM), butyl acrylate ( BA), methyl methylacrylate (MMA) as monomers, sodium dodocyl sulfonate ( SDS) as emulsifier. The solid content of copolymer emulsion was about 25wt%. The kinetics of emulsion copolymerization was studied by the weight method. The effects of the concentration of emulsifier, initiator, monomer and polymerization temperature on polymerization rate (R-p) were investigated in detail. The results showed that R-p proportional to [SDS](0.28), R-p proportional to [I](0.98). The apparent activation energy was 50.756 kJ.mol(-1). The copolymer emulsions had no change after stored at room temperature for 72 h, at 60degreesC for 48 h and at -5degreesC for 24 h respectively. The centrifugal stability of emulsions was characterized at 12000 r/min for 120 min. The sedimentation ratios showed that the centrifugal stability of emulsions increased with increasing the amount of emulsifier, while decreased with increasing the amounts of initiator and fluoromonomer respectively. The latex films could be dissolved in THF and toluene, while could be swelled in methanol and ethanol. The water absorption of latex films decreased with increasing the amount of fluoromonomer. The surface property of films was determined by Wilhelmy method. The contact angles for latex films to water increased apparently by introducing fluorine-containing groups, above 100degrees. This result showed the water-resistant property of copolymer latex films containing fluorine was improved.

Preparation and Surface Properties of Fluorinated Acrylates Copolymers

PREPARATION AND SURFACE PROPERTIES OF ACRYLIC COPOLYMERS CONTAINING FLUORINATED MONOMERS

Fluorinated Polyacrylate Emulsion and Surface Properties of Their Films

Preparation and Surface Property of Cationic Emulsifier-Free Fluorinated Polyacrylates

The Study of the Acrylate Copolymer Emulsion Containing Fluorine

Preparation and Surface Properties of Fluorine-Containing Diblock Copolymers PLMA-Block-PFAEA

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Preparation and Characterization of Soap-Free Fluorine-Containing Acrylate Latex

Preparation and characterization of fluorine-containing acrylate copolymers by 60Co γ-ray radiation co-polymerization

A Study on Preparation of Fluorine-Containing Acrylate/Alkyl Acrylate Copolymer Latex by Micro-Suspend Polymerization

Study on Crystallization and Surface Properties of Fluorinated Acrylate Copolymers

The polymerization and performance of fluorinated acrylic copolymer with low surface energy

Preparation Of Fluoro-Modified Acrylate Copolymer And Hydrophobicity Of Coatings Therefrom

Surface Structure and Properties of Fluorocopolymers Studied by XPS and Contact Angle

Effect of Sequence Structure on Wetting Behaviors of Fluorinated Methacrylate Polymers Based on Perfluorohexylethyl Methacrylate and Stearyl Acrylate

Preparation and Characterization of Fluorinated Polypropylene by Reactive Extrusion with Fluorinated Acrylate

RAFT PREPARATION AND CHARACTERIZATION OF TRIFLUOROETHYL METHYLACRYLATE AND STYRENE COPOLYMERS

Synthesis and surface property characterization of polyacrylate with short fluorocarbon side chain

Study on the Preparation and Surface Properties of Fluoroacrylate Copolymer Anti-Adherent

Influence of Fluorine Incorporation into Waterborne Acrylic Coatings on Resulting Hydrophobic, Thermal Stability and Drag- Reduction Properties

Study on preparation and forming mechanism of super-hydrophobic surface by perfluoroalkyl ethyl acrylate copolymers