Abstract:The crystal model of NaCl-type FCC-TiC (1− x ) N x was established, and the crystal structure of nonstoichiometric TiC (1− x ) N x was optimized by first-principles calculation method. The binding energy, formation energy, elastic modulus, density of states (DOS) and charge density of TiC (1− x ) N x were calculated. The crystal structure, electronic structure and mechanical properties of TiC (1− x ) N x were studied. The effects of bonding types and bonding properties on the mechanical properties were analyzed. The results show that the optimized TiC (1− x ) N x crystal structure, with the increase in N content, lattice constant and cell volume decrease, TiN crystal structure is easy to form, and its thermodynamics is the most stable. The analysis of B/G, B/C44, Cauchy pressure and Poisson's ratio shows that TiC has the highest brittleness, and TiN has the best toughness, while TiC (1− x ) N x is between TiC and TiN. The covalent bonds are mainly Ti-C and Ti-N bonds, but there are also a certain number of C-N bonds, Ti-C and Ti-N ionic bonds, and Ti-Ti metallic bonds. The doping of N changes the interaction force between the electrons in the metallic d layer and the non-metallic 2p orbital electrons, and also changes the interaction force between the electrons in the metallic bond d layer, thus affecting the hardness and toughness of TiC (1− x ) N x . As C atoms are gradually replaced by C atoms in the TiC (1− x ) N x crystal structure, the density of states at EF gradually increases, which leads to the enhancement of the metal bond Ti d –Ti d , thereby improving the conductivity of the material. The transition from Ti–C bond to Ti–N bond leads to the decrease in covalent bond, the enhancement of ionic property, the increase in hardness and the decrease in toughness. The nonstoichiometric TiC (1− x ) N x powders were synthesized by carbothermal reduction technique, and the lattice constants obtained by XRD were basically consistent with the calculated values. XPS analysis shows that there are Ti–C, Ti–N, C–C and C–N bonds in TiC (1− x ) N x . The experimental results are in good agreement with the calculated electronic structure and bond type, which indicates the reliability of the crystal model and calculation method.

Surface Properties of Titanium Nitride: A First-Principles Study

Stability of Ni in Nitinol Oxide Surfaces

An ab initio molecular dynamics study on Ti2AlN(0001) surfaces

First-principles study on TiC/TiN heterogeneous nucleation interface in high-titanium steel

Two-Dimensional Atomically Thin Titanium Nitride Via Topochemical Conversion.

Phase stability, chemical bonding and mechanical properties of titanium nitrides: a first-principles study

Evolution of chemical, structural, and mechanical properties of titanium nitride thin films deposited under different nitrogen partial pressure

Study of optical and electrical properties of TiN thin films prepared by cathodic ion sputtering

Plasma Nitridation and Mechanical Properties of Pure Titanium Casts

Nitrogen Mediated Electronic Structure of the Ti(0001) Surface

Study of Titanium Nitride for Low-E Coating Application

First Principles Calculations of the Influence of Nitrogen Content on the Mechanical Properties of Α-Ti

Electrical and optical properties of titanium nitride coatings prepared by atmospheric pressure chemical vapor deposition

First-Principles Study of Ni2p (0001) Surfaces

Nitric Oxide Adsorption and Dissociation on Nb(100) Surface

DFT Total Energy Study on the Atomic Geometry and Adsorption of Cu(100) C(2 × 2)-N Surface

First-Principles Study on the Mechanical Properties and Electronic Structure of Nonstoichiometric TiC(1−x)Nx

InN growth on BaTiO3 (111) substrates: A first-principles study

Investigation on Surface Nitridation of Titanium by Pulsed Laser

Nature of Chemisorption on Titanium Carbide and Nitride

Anisotropic Phase Transformation Mechanism on Coarse-Grained and Fine-Grained Pure Titanium at Low-Temperature Plasma Nitriding