Abstract:The traditional method for calculating the buffeting response of long-span bridges follows the strip assumption, and is carried out by identifying aerodynamic parameters through sectional model force or pressure measurement wind tunnel tests. However, there has been no report on predicting the buffeting response based on the sectional model vibration test. In recent years, the author has proposed a method, based on the integrated transfer function, for predicting the buffeting response of long-span bridges through theoretical and full-bridge tests. This provided an idea for predicting the buffeting response based on the sectional model vibration test. Unfortunately, the effectiveness and accuracy of this method have not been proven or demonstrated through effective tests. To solve this problem, a long-span suspension bridge was taken as a background. Parameters such as aerodynamic admittance were identified through a sectional model force measurement test and the integrated transfer functions were identified through a sectional model vibration test. A taut strip model test was also conducted. Furthermore, the buffeting response prediction results based on three kinds of wind tunnel test techniques were compared. The results showed that if the strip assumption was established, the results of the three methods aligned well, and that selecting a reasonable model aspect ratio for the test could effectively reduce the influence of the 3D effect; moreover, identifying the integrated transfer function by the sectional model vibration test could effectively predict the long-span bridge buffeting response. Furthermore, when the strip assumption failed, the results of the traditional calculation method using 3D aerodynamic admittance became smaller. A larger result would be obtained by neglecting the influence of aerodynamic admittance.

Wind-induced Buffeting Analysis and Comfort Assessment During Construction of Portal Bridge Pylon

Analysis on Comfort of Lower Suspended Footbridge Caused by Traffic Load

Comfort assessment for a pedestrian passageway suspended under a girder bridge with random traffic flows

Practical Analysis of Wind-Induced Human Comfort Condition of Tall Buildings

Wind-resistant safety analysis of light-weight steel portal frame structures

Effects of Temporary Pier on Buffeting Response of a Three-Tower Cable-Stayed Bridge Under Construction

Buffeting Analysis of a Suspension Bridge under Construction Based on Adjacent Wind Field Data

Analysis on dynamic characteristics and wind-induced buffeting response of Hezhang Large-span Bridge

Buffeting Characteristics of a Long-Span Cable-Stayed Bridge Crossing a Deep Canyon during Erection: Response Evaluation and Vibration Control

Buffeting analysis of long-span twin-box cable-stayed bridge during construction

Characteristics of the Wind Environment above Bridge Deck near the Pylon Zone and Wind Barrier Arrangement Criteria

Buffeting Reliability Analysis Of Long Span Concrete-Filled Steel Tube Arch Bridge During Construction Stage

Nonuniform wind characteristics and buffeting response of a composite cable-stayed bridge in a trumpet-shaped mountain pass

Lateral buffeting control of long-span cable-stayed bridge deck by viscous dampers

Strong Wind Characteristics and Buffeting Response of a Cable-Stayed Bridge under Construction

Buffeting Response Prediction of Long-Span Bridges Based on Different Wind Tunnel Test Techniques

Influence of wind directionality on the three-dimensional distortion of buffeting force on a streamlined bridge deck: Insight into the pylon interference effect

Buffeting Reliability Of Bridges With Structural Uncertainties

Analysis and Comparison on Wind Load of Long Span Girder Bridges with High Pier

REVIEW AND PROSPECT FOR PERFORMANCE AND CONTROL OF WIND-RESISTANT ON SUSPENSION BRIDGE UNDER CONSTRUCTION

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge