Abstract:In this paper, a new method of calculating the diffraction efficiency for diffraction / refraction infrared hybrid system is given. By using this method, an automatic measurement system is designed. This system covers the wavelength range of 1 similar to 3 mu m, 3 similar to 5 mu m and 8 similar to 12 mu m. We use a blackbody as the energy source, put the lens which is to be measured above a computer controlled turntable in order to gain different results in different filed of view. We also have several relay lenses to cope with long or negative focal length. We use two types of detectors to deal with wavelength range of 1 similar to 3 mu m and 3 similar to 12 mu m. Both the detector and preamplifier are assembled together so we can easily change them for different wavelength ranges. To improve the accuracy of the measurements, a new theory of measuring the main energy is developed to minimize the negative impacts of other diffraction orders and the environment. We use an adjustable slit cooperating with a two-axis stage to scan the focal point and by adjusting the width of the slit we can reduce the energy of other diffraction orders and the environment that may come into our detector. During the experiment process we can manually control the slit and two-axis stage to improve the efficiency and use our computer program to improve the accuracy. The energy modulator and lock-in amplifier also help to improve the accuracy of our system. We designed two standard lenses for the 3 similar to 5 mu m wavelength range. Both of them are made of the same material, have the same focal length of 200mm and their shape is almost the same. The only difference between them is that one of them is pure refraction piece which acts as a reference and the other one has a diffraction surface to achromatic aberration. The result fits our theory well and the possible causes of the differences are discussed. This system has a practical meaning in the quality evaluating of infrared hybrid system.

Diffraction Coupling of a Very Long Wavelength Quantum Well Infrared Photodetector Linear Array

Study on Grating'Coupling Very Long Wavelength Gaas/Algaas Qwip

A New Method Of Calculating The Diffraction Efficiency For Diffraction/Refraction Infrared Hybrid System

Design of a Beam-coupling System for a Chip-integrated Spectrometer with a Discrete Linear Waveguide

Vertical field enhanced nanostructure for quantum well infrared photodetector through Germanium subwavelength arrays

A Quasi-Symmetric Coupled Quantum Well and Its Electric-Optical Properties

Highly Efficient Metallic Optical Incouplers for Quantum Well Infrared Photodetectors

Antenna Structures for Optical Coupling in Quantum-Well Infrared Detectors

Studies on absorption efficiency enhancement of quantum well infrared photodetector by using photonic crystal structures

A tubular quantum well infrared photodetector under vertically-incident light coupling

Design Principle of Au Grating Couplers for Quantum-Well Infrared Photodetectors

Towards Flexible Quantum Well Infrared Photodetectors

Photocurrent Spectra of Very Long Wavelength GaAs/AlGaAs Quantum Well Infrared Photodetector

A Novel Coupled Quantum Well Structure with Large Field-Induced Refractive Index Change and Low Absorption Loss at 1.55 ?M

Quantum Well Intermixing For The Realization Of Photonic Integrated Circuits

Enhanced response over wavelength range of 7-12 µm for quantum wells in asymmetric micro-pillars

Broadband and High-Enhancement-factor Integrated Long-Wave Infrared Sensor Using the Photonic Crystal Assisted Subwavelength Grating Waveguide

Photocurrents of 14 Μm Quantum-Well Infrared Photodetectors

Achieving Ultra‐High Background‐Limited Detectivity by a Brillouin Zone Folding Induced Quasi‐Bound State in the Continuum

Ultimate performance of Quantum Well Infrared Photodetectors in the tunneling regime

Broadband Response and a Transformation between Dual‐ and Single‐Wavelength Detection in Coupled Doped‐Well Quantum Cascade Detector