Abstract:Microchip electrophoresis (MCE) is widely applied in food, environment, medicine, and other fields, owing to its high separation efficiency, low consumption of reagents and samples, and ease of integrating multiple operating units. Polymer microchip materials like cycloolefin copolymer (COC) are low-cost and easy to fabricate. However, their practical applications are limited by the non-specific adsorption on channel surface during electrophoresis and the instability of electroosmotic flow. These shortcomings can be solved by COC surface modification. In this study, a static coating and dynamic/static coating combined strategy was used to develop a channel-surface-modified COC microchip. Combined with laser-induced fluorescence (LIF) detection, a MCE-LIF separation and analysis method was developed for detecting functional components in health care products. The separation performance of MCE was improved by the static coating microchannel surface modification method. The static coating was constructed by hydrophobic amino acid adsorption, glutaraldehyde immobilization, and hydrophilic amino acid functionalization on the COC microchannel surface. The separation performance of MCE was improved by microchannel surface modification combined with dynamic/static coating. The static coating was constructed by valine adsorption, carboxyl activation, and ethylenediamine functionalization on the COC microchannel surface. The dynamic coating is automatically formed by introducing a buffer solution containing hydroxypropyl methylcellulose and sodium dodecyl sulfate into the microchannel. The physical and chemical properties of surface-modified microchannels and the factors governing electrophoretic separation were studied. Combined with LIF detection, the MCE-LIF separation and analysis of lysine and γ-aminobutyric acid present in children's health care products, as well as aspartic acid and taurine in sport drinks, were developed. The recoveries of lysine and γ-aminobutyric acid in children's health care products were 84.8%-118%, and the relative standard deviations (RSDs) were less than 7.2% (n=3). The recoveries of aspartic acid and taurine in sport drinks were 97.5%-118%, and the RSDs were less than 6.4% (n=3). The analysis results are consistent with the HPLC results, and the method has potential for application in the separation and analysis of anionic amino acids in health care products.

Steady Surface Modification of Polydimethylsiloxane Microchannel and Its Application in Simultaneous Analysis of Homocysteine and Glutathione in Human Serum.

Proteins Modification of Poly(dimethylsiloxane) Microfluidic Channels for the Enhanced Microchip Electrophoresis.

Covalent modified hydrophilic polymer brushes onto poly(dimethylsiloxane) microchannel surface for electrophoresis separation of amino acids

Hydrophilic Biopolymer Grafted on Poly(dimethylsiloxane) Surface for Microchip Electrophoresis.

Fabrication of a polystyrene microfluidic chip coupled to electrospray ionization mass spectrometry for protein analysis.

Nonionic Surfactant Dynamic Coating of Poly(dimethylsiloxane) Channel Surface for Microchip Electrophoresis of Amino Acids

Solution-phase Surface Modification in Intact Poly(dimethylsiloxane) Microfluidic Channels.

The Use of Poly(dimethylsiloxane) Surface Modification with Gold Nanoparticles for the Microchip Electrophoresis.

Separation of Proteins on Surface‐modified Poly(dimethylsiloxane) Microfluidic Devices

A dynamically modified microfluidic poly(dimethylsiloxane) chip with electrochemical detection for biological analysis.

In-Situ Grafting Hydrophilic Polymer on Chitosan Modified Poly (dimethylsiloxane) Microchip for Separation of Biomolecules

A Sol-Gel-Modified Poly(Methyl Methacrylate) Electrophoresis Microchip with A Hydrophilic Channel Wall

Modification of Poly(dimethylsiloxane) Microfluidic Channels with Silica Nanoparticles Based on Layer-by-layer Assembly Technique

An Approach for Irreversible Bonding of PDMS-PS Hybrid Microfluidic Chips at Room Temperature

Study on the Separation of Amino Acids in Modified Poly(dimethylsiloxane) Microchips.

Surface Modification Of Poly(Dimethylsiloxane) Microfluidic Chips By Treatment In An Oxygen Atmosphere

Modification of Amorphous Poly(ethylene Terephthalate) Surface by UV Light and Plasma for Fabrication of an Electrophoresis Chip with an Integrated Gold Microelectrode

Elimination of suction effect in interfacing microchip electrophoresis with inductively coupled plasma mass spectrometry using porous monolithic plugs.

Polycation Coating Poly(dimethylsiloxane) Capillary Electrophoresis Microchip for Rapid Separation of Ascorbic Acid and Uric Acid

Rapid and Simple Half-Quantitative Measurement Alpha-Fetoprotein by Poly(dimethylsiloxane) Microfluidic Chip Immunochromatographic Assay

[Surface-modified microchip electrophoretic separation and analysis of functional components in health care products]