Abstract:Surface angled cracks on critical components in high-speed machinery can lead to fractures under stress and pressure, posing a significant threat to the operational safety of equipment. To detect surface angled cracks on critical components, this paper proposes a “Quantitative Detection Method for Surface Angled Cracks Based on Full-field Scanning Data.” By analyzing different ultrasonic signals in the full-field scanning data from laser ultrasonics, the width, angle, and length of surface angled cracks can be determined. This study investigates the propagation behavior of ultrasonic waves and their interaction with surface angled cracks through theoretical calculations. The crack width is solved by analyzing the distribution of Rayleigh waves in the full-field scanning data. This paper also discusses the differences in ultrasonic wave propagation between near-field and far-field detection and identifies the critical point between these regions. Different computational methods are employed to calculate the inclination angle and the crack endpoint at various scan positions. Four sets of experiments were conducted to validate the proposed method, with results showing that the errors in determining the width, angle, and length of the surface angled cracks were all within 5%. This confirms the feasibility of the method for detecting surface angled cracks. The quantitative detection of surface angled cracks on critical components using this method allows for a comprehensive assessment of the component’s condition, aiding in the prediction of service life and the mitigation of operational risks. This method shows promising application potential in areas such as aircraft engine blade inspection and gear inspection.

Study of Dual-Laser-Generated Surface Acoustic Waves Interacting with Multiangled Surface Breaking Cracks by Finite Element Method

Numerical Study for Surface-breaking Crack Detection on A Cylinder Using Laser-generated Ultrasound

Study on the Interaction Mechanism of Laser-Generated Rayleigh Waves and Subsurface Inclined Cracks

A Study of Inner Crack Testing with the Laser Phased Array Method.

Laser-generated Surface Waves for Quantitative Detection of Inclined Surface Cracks Based on Finite Element Analysis

Surface Crack Identification on a Cylinder Using the Signal Enhancement of the Scanning Laser Line Source Method

Numerical Simulation of the Interaction of Laser-Generated Rayleigh Waves with Subsurface Cracks

Numerical Simulation of Surface Acoustic Wave and Detection of Surface Crack in Steel

Numerical Study of Length and Angle Gauging for Subsurface-Inclined Cracks Based on Reflected Surface Waves with Laser Ultrasonic Technique

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Detecting features of defect metal based on laser ultrasonic technique

INTEGRATED TECHNOLOGY FOR DETECTION AND REPAIR OF MECHANICAL COMPONENT SURFACE FATIGUE MICROCRACKS USING PULSED LASER

Finite Element Analysis of Laser-Generated Rayleigh Wave for Sizing Subsurface Crack in Frequency Domain

Numerical Simulation of Angled Surface Crack Detection Based on Laser Ultrasound

Quantitative Detection of Lateral Subsurface Cracks Based on Laser-Generated Rayleigh Waves in the Frequency Domain

Depth Evaluation for Surface-Breaking Cracks with Mode-Converted Rayleigh Waves Generated by a Point-Focused Laser

A Bi-grating Laser Acoustic Spectrum Method for Small Surface-Breaking Crack Imaging and Depth Evaluation

Study on detection of angled surface cracks with laser-generated Rayleigh waves

Quantitative Estimation of Crack on or Near Surface Using Laser-Ultrasonic Surface Wave: Numerical Simulation

Quantitative Detection Method for Surface Angled Cracks Based on Laser Ultrasonic Full-Field Scanning Data

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology