Abstract:Abstract When the fine-blanking process is used, secondary grinding or processing can be omitted because the shear surface of fine-blanking parts can achieve almost zero fracture zone requirements. The primary objective of the fine-blanking process is to reduce the fracture zone depth and die roll zone width. This study used a 2.5-mm-thick central processing unit (CPU) thermal heat spreader as an example. Finite element analysis software was employed to simulate and optimize the main eight process parameters that affect the fracture zone depth and die roll zone width after fine-blanking: the V-ring shape angle, V-ring height of the blank holder, V-ring height of the cavity, V-ring position, blank holder force, counter punch force, die clearance, and blanking velocity. Simulation analysis was conducted using the L 18 (2 1 × 3 7 ) Taguchi orthogonal array experimental combination. The simulation results of the fracture zone depth and die roll zone width were optimized and analyzed as quality objectives using Taguchi’s smaller-the-better design. The analysis results revealed that with fracture zone depth as the quality objective, 0.164 mm was the optimal value, and counter punch force made the largest contribution of 25.89%. In addition, with die roll zone width as the quality objective, the optimal value was 1.274 mm, and V-ring height of the cavity made the largest contribution of 29.45%. Subsequently, this study selected fracture zone depth and die roll zone width as multicriteria quality objectives and used the robust multicriteria optimal approach and Pareto-optimal solutions to perform multicriteria optimization analysis. The results met the industry’s fraction zone depth standard (below 12% of blank thickness) and achieved a smaller die roll zone width.

Research of the Knowledge-Based Fineblanking Process Planning System

Knowledge Based Design Support System for Complex Flanging Process Planning

Research of Knowledge-Based System for Stamping Process Planning

Knowledge-based system for strip layout design in fineblanking

Planning Process Families with a Knowledge-Based System

Research and Developing on Knowledge-based CAD System for Blanking Die Design

State-of-the-art and Future Challenge in Fine-Blanking Technology

Numerical simulation and optimization of process parameters in fineblanking process

Study on Extrusion Process and Die Design System Based on KBE

Advances in Forming Simulation for Fine-Blanking Process

Research on Knowledge Integration Technology for Stamping Production Modeling

An Investigation of Step-Shaped-punch Fine-Blanking Process Using Finite Element Method

Research on KBE Technology in Stamping Die Design

Knowledge-Based Integrating Modeling Method for Stamping Product and Process

Finite element optimization of veering factor in fine-blanking process

Development of Knowledge-Based System for Die Forging Process and Tool Design

Study on knowledge integration system oriented to product design

Research on Material Selecting and Heat Treatment of Plate Metal Fine-blanking Die

The Study of Blank Optimization Methods for Sheet Metal Forming Parts

Numerical simulation and optimization of fine-blanking process for copper alloy sheet

Research of Knowledge Discovery Method in Supporting Stamping Process Design