Abstract:Incremental flanging (IF) has emerged as a flexible and low-cost alternative to conventional stamping processes suitable for rapidly producing multi-variety and small-batch flanged parts. However, due to the material hardening as well as large and unevenly distributed springback, it is still challenging to manufacture and control the forming quality of large-size open-edge flanged parts with a length of more than 1.0 m, a width of more than 100 mm and a flange height of more than 30 mm. In the present work, combining the advantages of robotic motion and incremental flanging, Robot-assisted incremental flanging (RAIF) technology was proposed to utilize a robot-guided roller to progressively bend the sheet to the desired flanging angle. As a typical path control-based flexible forming technology, two different toolpath strategies were proposed, corresponding generation algorithms were deduced, and the effects of the proposed toolpath strategies were compared. The results demonstrated that the SRAIF strategy, which synchronizes the rotation and revolution of the rollers, can effectively guide material flow along the circumferential direction to suppress the generation of edge waves and reduce springback, thereby significantly improving the geometric accuracy of the flanged parts. Further, the effect of the critical parameters was investigated. The results indicated that the farther the flanging starts from the free end, the magnitude of springback angle increases. As the rotation velocity of the roller increases, the geometric accuracy of the flanged parts deteriorates.

Knowledge Based Design Support System for Complex Flanging Process Planning

Design and Integration Technology of Communication System of Finish Machining for Aircraft Fuselage-Wing Joints

Evaluation Model & Knowledge-Base of PCB DFM

Method for the Combination of Knowledge Fusion and Blurry Inference

KBE-Based Mold Cavity Design System

Planning Process Families with a Knowledge-Based System

A Design Knowledge Management Model for Civil Aircraft Cabin Based on Markov Logic Networks

Study on knowledge integration system oriented to product design

Research on Design Knowledge Expression Method of Abrasive Machine Tool Based on Axiomatic Design

Knowledge-based integrated management system of ornament design

A Knowledge-Based Design for Manufacture System

Human-Machine Hybrid Enhanced Intelligent Design of Aircraft Structural Parts Based on Knowledge

Research on knowledge base system of flexible modular design for mechanical products

STRUCTURE KNOWLEDGE BASED MECHANICAL PRODUCTS DESIGN TECHNOLOGY

Development of Integrated Design Software for Injection Machine Mould Board

Study on Knowledge Based Integrated Design for Manufacture of Mechanical Parts

Applied Research on Technologies of Design for Mass Customisation

Research on Key Technologies for Product Axiomatic Design and Configuration Integration

Toolpath strategy study for improving geometric accuracy of large-size open-edge flanged parts in robot-assisted incremental flanging

Drawing Process Design Based on Fuzzy Knowledge Reasoning

Enhanced functions supporting process planning for aircraft structural parts