Abstract:ABS particles with core-shell structure and nano-CaCO3, particles were employed to modify hard PVC simultaneously. The phase morphology and fracture behavior of the composites were investigated by means of transmission electron microscope (TEM), scanning electron microscope (SEM) and mechanical tests. Based on reasonable assumptions and material parameters obtained by the true stress-strain curve, finite element simulation employing the two-dimensional representative volume element model was carried out to explore the effects of ABS and CaCO3 particles on the fracture behavior of the composites. Results showed that ABS and CaCO3 particles have a synergistic toughening effect at nano-CaCO3 contents lower than 12 phr. The TEM observation revealed that the ABS particles deformed mainly by cavitation rather than interfacial debonding. The finite element analysis (FEA) results indicated that the blend yields when local yielding areas in the matrix begin to interconnect throughout the interstitial matrix between the particles. The predicted yield stresses for the PVC/ABS binary blend and the PVC/ABS/nano-CaCO3 ternary composite are consistent with experimental values. Moreover, the FEA results implied that both ABS and CaCO3 particles could toughen the PVC matrix, and the well-dispersed CaCO3 particles had a better toughening effect. If the CaCO3 particles are agglomerated,however, the large crevices between CaCO3 agglomerates and PVC matrix would initiate cracks at the interface and lead to decrease of mechanical properties.

STUDY ON MODIFICATION OF CARBON NANOTUBES WITH POLYMERS AND TOUGHENING OF PVC WITH MODIFIED CARBON NANOTUBES

Impact of Chemical Modification of Bamboo Fibers on Properties of Fiber Reinforced PVC Composites

PPTA-oligomer Functionalized Multiwalled Carbon Nanotubes Synthesized by "One-Pot" Method for Reinforcement of Polyvinyl Chloride

Synthesis of ACR/nanometer SiO2 Composite Particles and Their Tonghening Effect on PVC

Enhancement of mechanical properties of poly(vinyl chloride) with Polymethyl methacrylate-grafted halloysite nanotube

Preparation and Properties of Polyvinyl Chloride/Carbon Nanotubes Composite

Study on Toughening of PVC by Modified Nano-CaCO3

Modification of Poly(vinyl Chloride) with Nano-CaCO3 Coated with Poly(methyl Methacrylate)

Study of SMA Graft Modified MWNT/PVC Composite Materials

Enhancement of Modulus, Strength, and Toughness in Poly(methyl methacrylate)-Based Composites by the Incorporation of Poly(methyl methacrylate)-Functionalized Nanotubes

STUDY ON IN SITU MODIFICATION OF PUR WITH CARBON NANOTUBES

Preparation and Properties of Polyvinyl Chloride/ Modified Halloysite Nanotubes Nanocomposites

Effect of Hyperbranched Poly(amine-ester) Grafted Nano-SiO_2 on Reinforcement and Toughness of PVC

Effects of Modified Single-Wall Carbon Nanotubes on the Mechanical Properties of Polyvinyl Alcohol Composites by Molecular Dynamics Simulation

EFFECT OF RUBBER AND INORGANIC RIGID PARTICLES ON FRACTURE BEHAVIOR OF INJECTION-MOLDED PVC NANOCOMPOSITES

Study of Structure and Property of PBT/Carbon Nano-tubes Composite

Mechanical Strength Improvement of Polypropylene Threads Modified by PVA/CNT Composite Coatings

Study on CaCO3/PVC nanocomposite

Structure and Properties of Poly(vinyl Chloride)/halloysite Nanotubes Nanocomposites

Toughness Enhancement of Poly(methyl methacrylate) (PMMA)/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Nanocomposites by Multiwall Carbon Nanotubes (MWNT)

Effects of the Reinforcement and Toughening of Acrylate Resin/Caco3 Nanoparticles on Rigid Poly(Vinyl Chloride)