Abstract:For decades, researchers have struggled to solve 6-axis robotic vibration while machining hard-to-cut materials. On the other hand, wire electric discharge machining (WEDM) stands out as a non-conventional machining process able to cut large and complex profiles of any conductive hard-to-cut material with minor non-contact forces. Thus, WEDM is a promising process to be combined into a robot to overcome vibration and low accuracy. However, the robot characteristics of a high degree of freedom combined with payload limitation oblige to separate the heavy wire winding system from the robot end-effector, demanding an equally high degree of freedom and unconventional solutions to feed and control the wire electrode. This study designs and reports experimental findings of the first robotic WEDM apparatus based on a high-speed winding system with 600 m of wire length, capable of controlling the wire speed from 1 to 10 m/s and wire tension from 0.1 to 10 N. The system adopts flexible outer cases to travel and reciprocate the wire into a 7-axis robotic system composed of a 6-axis robot and an external rotating axis. The proposed design is a highly dynamic process whose wire tension and speed are achieved by a hybrid controller to cope with the non-linear relation of speed and tension provided by the magnetic clutch. It combines a regression open-loop control for optimality and wire breakage avoidance with a closed-loop control to guarantee admissibility while coping with wire friction disturbances. The findings review a novel wire winding system capable of controlling usual wire disturbance and stepped surface of reciprocating high-speed WEDM as well as additional friction and elastic behaviour of the flexible case, delivering wire tension of ± 12% along with stable EDM process and uniform surface roughness between wire reciprocation areas with a Ra of 2.94 μm. Potential adoption of the method can finally make 6-axis robots a feasible and advantageous technique compared to computer numeric control (CNC) while shaping monolithic and complex workpieces of conductive and hard-to-cut materials.

A Motion Control System for LSWEDM Machine Tool Based on MCX314As

Control System Design of High Speed Industrial Zigzag Stitching Machine

Trajectory Planning For The Four Axis Wedm Machine Tool And Its Implementation

Study on Adaptive Servo Control Strategy of WEDM Based on Discharge State Detector

Design for Control System of 3D CNC Wire Bending Machine Based on Virtual Axis

A New Model of WEDM-CNC System with Digitizer/Player Architecture☆

Design of Whole Software Coiling Machine NC System Based on PCNC

Design of DSP-based Constant-tension Wire Winding System

Windows-based numerical control system design for WEDM

Design of High Speed Die-cutting Machine Controller

Smoothing the Extrapolation of Four-Axis Simultaneous Control in Ruled Surface WEDM

Research on Control System of a New Wire Saw Based on LabVlEW

Six-axis Electro-discharge Machining CNC System and Machine Tool

Processing Method of Spatial Complicated Curved Surface of High-speed WEDM

Generation and Control Method of EDM Mill Servo Track Based on Programmable Multi-axis Controller

Development Of A Computer Assistant Programming System For Micro/Nano Milling Tool Fabrication By Multi-Axis Wire Edm

CAD/CAM Integration System of 3D Micro EDM

Sliding-mode Controller and Algorithm for Improving Servo Control of Discharge Gap in Precise Fast Hole EDM

Integrated Controller Design and Application for CNC Machine Tool Servo Systems Based on Model Reference Adaptive Control and Adaptive Sliding Mode Control

Development and Experimental Research on Sinking Electro-discharge Machining Numerical Control System

Control design of a reciprocating high-speed wire feed system for 7-axis robotic electric discharge machining