Abstract:CuO nanostructures are optoelectronic materials that are responsive to a wide range of visible light, and they are widely used as photoelectrodes for sunlight-based photoelectro-chemical (PEC) applications. We herein introduce a green, efficient plasma-based method for preparing a CuO nanoparticle film with excellent performance in PEC water splitting. The cold plasma was generated on copper foil by dielectric barrier discharge in ambient air. Through the 30 s discharge, an aqueous film was formed on the Cu surface, which had acted as the medium facilitating the reactions between the Cu and the active species from the plasma. The aqueous film was then crystallized into a Cu4(NO3)2(OH)6 nanosheet layer during drying. Finally, a CuO film with a thickness of 360 nm composed of CuO nanoparticles with sizes of 50-100 nm was obtained by calcining the Cu4(NO3)2(OH)6 at 270 degrees C. Under AM 1.5 G 100 mW cm-2 illumination, the CuO film exhibited a high photocurrent density of -1.2 mA cm-2 at 0.35 V RHE), comparable with the CuO nanostructures on Cu substrate by other methods. The prolonged discharge (240 s) resulted in thicker film (950 nm), which showed a lower photocurrent density because of the increased charge-transfer resistance. This method for CuO nanoparticles does not need any chemicals and possesses the advantages of low cost and high efficiency. Furthermore, using flexible and conductive Cu as the substrate makes it a competitive technique for fabricating CuO-based photoelectrodes. By adopting a suitable photocorrosion-protection scheme, the CuO film can hopefully be used for PEC hydrogen generation and other

Aligned 2-D Nanosheet Cu2O Film: Oriented Deposition on Cu Foil and Its Photoelectrochemical Property

Electrodeposition of flake-like Cu2O on vertically aligned two-dimensional TiO2 nanosheet array films for enhanced photoelectrochemical properties

Electrodeposited Cu2O on the {101} Facets of TiO2 Nanosheet Arrays and Their Enhanced Photoelectrochemical Performance

Hydrothermal synthesis, characterization, electrochemical, and optical properties of 2D sheet-like CuO nanostructures

Hierarchical nanostructures of cupric oxide on a copper substrate: controllable morphology and wettability

Morphology-controlled electrodeposition of Cu 2O microcrystalline particle films for application in photocatalysis under sunlight

Cu2O nanorod thin films prepared by CBD method with CTAB: Substrate effect, deposition mechanism and photoelectrochemical properties

Electrochemically Deposited Cu2O on TiO2 Nanorod Arrays for Photovoltaic Application

Electrodeposition of Cu2O Films and Their Photoelectrochemical Properties

Preparation and Photoelectric Property of Cuprous Oxide Thin Film with Different Morphologies

Morphological Control of Cu2O Micro-Nanostructure Film by Electrodeposition

Fabrication And Photocatalytic Property Of Cuo Nanosheets Via A Facile Solution Route

Synthesis and Characterization of Nanostructured CuO Array Films

A Novel Method to Synthesize Highly Photoactive Cu2O Microcrystalline Films for Use in Photoelectrochemical Cells.

Well-aligned arrays of CuO nanoplatelets.

Universal Deposition Strategy of Nanoporous Complex Oxide Thin Films for Photoelectrochemical Applications

Template-free Fabrication of Nano-sized Cu2O Hollow Spheres, Sheets and Octahedrons in Cu-citrate System and Their Morphology-dependent Semiconductor Type

In-Depth Study of Chemically Electrodeposited Cuprous Oxide (Cu2O) thin Films on ITO Glass

Preparation of CuO Nanoparticles Film on Cu Substrate by Air Cold Plasma and Its Photoelectrochemical Properties

A Simplified Chemical Synthesis of Cu2o Films with Periodic Pattern Transfer

Growth of Novel Nanostructured Copper Oxide (cuo) Films on Copper Foil