A New Design of In-situ Ti(C,N) Reinforced Composite Coatings and Their Microstructures, Interfaces and Wear Resistances.
Mingliang Wang,Hongzhi Cui,Na Wei,Lei Ding,Xinjie Zhang,Yong Zhao,Canming Wang,Qiang Song
DOI: https://doi.org/10.1021/acsami.7b17286
IF: 9.5
2018-01-01
ACS Applied Materials & Interfaces
Abstract:Here, a unique combination of a novel carbon-nitrogen source (g-C3N4) with different mole ratios of Ti/g-C3N4 has been utilized to fabricate iron matrix composite coatings by a synchronized powder feeding plasma transferred arc (PTA) cladding technology. The results show that submicron Ti(C,N) particles are successfully fabricated in situ on a Q235 low carbon steel substrate to reinforce the iron matrix composite coatings and exhibit dense microstructures and good metallurgical bonding between the coating and the substrate. The microstructure of the coating consists of an -Fe matrix and Ti(C,N) particles when the mole ratio of Ti/g-C3N4 is no more than 5:1. The microhardness and wear resistance of the coating gradually improve with increasing abundance of the in situ synthesized Ti(C,N) particles. Interestingly, for a Ti/g-C3N4 mole ratio of 6:1, a fine lamellar eutectic Laves phase (Fe2Ti) appears, and this phase further improves the microhardness and wear resistance of the coating. The microhardness of the coating is 3.5 times greater than that of the Q235 substrate, and the wear resistance is enhanced 7.66 times over that of the substrate. The Ti(C,N)/Fe2Ti and Fe2Ti/-Fe interfaces are very clean, and the crystallographic orientation relationships between the phases are analyzed by high-resolution transmission electron microscopy (HRTEM) and an edge-to-edge matching model. The theoretical predictions and the experimental results are in good agreement. Furthermore, based on the present study, for the solidification process near equilibrium, smaller interatomic spacing misfits and interplanar spacing d-value mismatches contribute to the formation of crystallographic orientation relationships between phases during the PTA cladding process. The existence of orientation relationships is beneficial for improving the properties of the coatings. This work not only expands the application fields of g-C3N4 but also provides a new idea for the preparation of Ti(C,N) particle-reinforced composite coatings.