Abstract:Volatile organic compounds (VOCs) are chemicals emitted by various groups, such as foods, bacteria, and plants. While there are specific pathways and biological features significantly related to such VOCs, detection of these is achieved mostly by human odor testing or high-end methods such as gas chromatography-mass spectrometry that can analyze the gaseous component. However, odor characterization can be quite helpful in the rapid classification of some samples in sufficient concentrations. Lower-cost metal-oxide gas sensors have the potential to allow the same type of detection with less training required. Here, we report a portable, battery-powered electronic nose system that utilizes multiple metal-oxide gas sensors and machine learning algorithms to detect and classify VOCs. An in-house circuit was designed with ten metal-oxide sensors and voltage dividers; an STM32 microcontroller was used for data acquisition with 12-bit analog-to-digital conversion. For classification of target samples, a supervised machine learning algorithm such as support vector machine (SVM) was applied to classify the VOCs based on the measurement results. The coefficient of variation (standard deviation divided by mean) of 8 of the 10 sensors stayed below 10%, indicating the excellent repeatability of these sensors. As a proof of concept, four different types of wine samples and three different oil samples were classified, and the training model reported 100% and 98% accuracy based on the confusion matrix analysis, respectively. When the trained model was challenged against new sets of data, sensitivity and specificity of 98.5% and 98.6% were achieved for the wine test and 96.3% and 93.3% for the oil test, respectively, when the SVM classifier was used. These results suggest that the metal-oxide sensors are suitable for usage in food authentication applications.

Development and Application of an Electronic Nose System Based on ARM9

Application of Electronic Nose in Determination of Milk Quality

A Portable Electronic Nose Intended for Home Healthcare Based on a Mixed Sensor Array and Multiple Desorption Methods

Design of Embedded Electronic Nose Based on Labview and PCA Analytic Method

Design and Application of Embedded Electronic Nose Based on LabVIEW and PCA Analytic Method

Portable Electronic Nose System Based on Virtual Instruments Platform

Development of a Portable Electronic Nose Based on a Hybrid Filter-Wrapper Method for Identifying the Chinese Dry-Cured Ham of Different Grades

Detection of adulteration in sesame oil by bionic electronic nose

Analysis and Design of Smell-Seeing Electronic Nose System

Optimization of Sensors Array as an Electronic Nose in Identifying Adulterate Milk

Research and Application of Electronic Nose in Food Inspection

Development of a Hand-held Electronic Nose Based on STC89C516RD+MCU

Advanced Technology and New Application in Electronic Nose

Identification of the Rice Wines with Different Marked Ages by Electronic Nose Coupled with Smartphone and Cloud Storage Platform

Towards the Development of a Portable Smell-Seeing Electronic Nose and Its Applications in Amine Recognition

Electronic Nose and the Development of Its Application to Classify of Dairy Products

Construction and Simple Application of a Primary Electronic Nose System

Design and Validation of a Portable Machine Learning-Based Electronic Nose

Optimized of Sensor Array and Detection of Moldy Degree for Grain by Electronic Nose

A wearable Electronic Nose SoC for healthier living

Development of Application Research of Electronic Nose in Food Industry