Abstract:Since vacuum circuit breakers gradually advanced to higher voltage levels, axial magnetic field (AMF) contacts have drawn a great deal of attention due to their excellent breaking ability. The cup-type AMF contact is a common kind of AMF contact, which has much potential in contact design and application of high voltage grade systems due to the advantages of strong structural strength, uniform magnetic field distribution, lower resistance, etc. This study analyzes the arcing characteristics of a cup-type AMF contact with a large slotted rotation angle at various diameter-to-gap ratios (DGRs). The arcing process is divided into five stages as follows: initial diffusion, contracting, fully constricted, re-diffusion, and extinguished. Arc self-rotation and anode separation phenomena in the re-diffusion stage appear when the DGR is 58/24. The reasons for these occurrences were discussed and explained with regard to the magnetic field vector's spatial distribution. The duration of each stage and the current threshold of a fully constricted arc will both differ with the change of the DGR. The structural parameters of the fully constricted arc were computed through the method of imaging the luminous intensity distribution after the arc was fully constricted. The source of the change in the arc voltage can be seen in the variation of arc structural parameters, which also reflect anode activity intensity to a certain extent. The transient magnetic field simulation method was used to explain why the arc under the same instantaneous current shows variable morphology at the extinguished stage and contracting stage in one arcing process. The research results presented in the article can be used as a reference for developing high-voltage cup-type AMF contacts.

Voltage-Current Characteristics of the Stationary DC Arc and the Stable Arcing Point

Experimental Research on the Voltage-current Characteristics of the Stationary DC Arc

Experimental Research on Voltage-Current Characteristics of Carbon AC Arc

Experimental Research on the Thermal Characteristic of Low-Voltage Alternating Current (AC) Arc Faults

DC Arc Fault: Characteristic Study and Fault Recognition

Investigation on the Arc Root Characteristics of Vacuum Arc Between the Iron-Core Cup-Shaped Transverse Magnetic Field Contacts

Research on Motion Characteristics of Arc at Low Air Pressure

Study on Characteristics of Low Energy Arc Discharge

Numerical investigations of AC arcs' thermal characteristics in the short gap of copper-cored wires

Study on Voltage Characteristics of Short Air Arc with High Current Density Arc Root

Experimental Study on Arcing Process of Vacuum Arc under Wan-Type Contacts

Characteristics and High Frequency Equivalent Model of Low Voltage DC Fault Arc

Tests on the Arc Voltage of Field Circuit Breaker

Research on Restriking Phenomena and Mechanism During DC Arc Motion Process

Experimental Study on Arc Behaviors of a Bridge-Type Contact when Opening a Resistive Load in the Range of from 280VDC to 730 VDC

Performance and Characteristics of a Small-Current DC Arc in a Short Air Gap

Influence of external AC transverse magnetic field on air arc oscillation patterns and its application in DC forced current zero techniques

Analysis of Arc Characteristics and Fault Detection in Low Voltage DC System

Experimental Investigation of Vacuum Arc Characteristic under Axial Magnetic Field

Experimental Study of Electrical Characteristics on Pantograph Arcing

Experimental Study and Characteristic Analysis of Vacuum Arc Between Cup-Type Axial Magnetic Contacts under Different Diameter-to-gap Ratios