Abstract:In order to measure the frequency of a sinusoidal signal in high precision,the article designs a digit frequency meter based on FPGA (field programmable gate array).Besides measuring frequency,the device can also measure the time interval of two square signals and the duty ratio of a pulse signal.With FPGA and MCU (micro control unit) as the kernel,the meter adopts the method called ‘Parallel Multi-Ways Counting Method’ to realize the high precise measurement.Specifically,signals would input FPGA after high frequency amplification module and high frequency comparing module.And then signals would be divided into multi-ways to decrease frequency by different times and be counted synchronously.Finally,MCU would select the mostaccurate result and get the final result after computing.After the test,the meter can measure the frequency of a sinusoidal signal from 1 Hz to 199 MHz and from 10 mVrms to 1 Vrms with the relative error not above 0.0001％;the meter can measure the time interval of two square signals from 50 mV to 1 V and from 100 Hz to 1 MHz with the relative error not above 1％;the meter can measure the duty ratio of a pulse signal from 50 mV to 1 V and from 1 Hz to 5 MHz with the relative error not above 1％.Therefore,the meter has thefeature of high precision,wide frequency range and wide amplitude.

High Precision A/D Conversion Circuit Design Based on FPGA

Design of High Accuracy High Conversion Ratio Single-Stage Switching Power Converter for Modern FPGAs at 10Mhz

Design of a 12 bit High-Stability Digital-to-Analog Converter

A New Digital to Analog Converter Based on Low-Offset Bandgap Reference.

An 18-Bit High Performance Audio Sigma-Delta D/A Converter

Digital Capacitance Measurement System Based on FPGA

The Design and FPGA Verification of Interpolation Filter Used in △-∑ DAC

The Design and FPGA Verification of a General Structure, Area-optimized Interpolation Filter Used in /spl Delta/-/spl Sigma/ DAC

An 18-Bit High Performance Audio ∑-△D/A Converter

A 19 ps Precision and 170 M Samples/s Time-to-Digital Converter Implemented in FPGA with Online Calibration

An A/D Converting Technology with High Precision,Low Cost and Multiple Measuring Range

Design of high precision frequency meter with FPGA

A Low-Cost FPGA-Based Coarse-Fine Counting Time-to-Digital Converter With External High-Precision Reference Clock

High-Resolution, Multi-Channel FPGA-Based Time-to-Digital Converter

A 1.6-Gsps High-Resolution Waveform Digitizer Based on a Time-Interleaved Technique

A Δ-Σ Digital-to-Analog Converter for Digital Audio Application

A 1.15-Ps Bin Size and 3.5-Ps Single-Shot Precision Time-to-Digital Converter with On-Board Offset Correction in an FPGA

Design of a high-precision time-to-digital converter in an Elitestek Ti60 field-programmable-gate-array

The Design of High Precision Digital B Mode Ultrasound Scanner System Based on FPGA

Design of analog signal sampling and isolated transmission system based on FPGA