Abstract:This study presents a novel method for independently calculating organic matter (OM) removal and electricity generation in a microbial fuel cell (MFC) treating sewage. This methodology used OM concentration as the exclusive variable for input, facilitating the prediction of electricity generation with variable Coulombic efficiency. The employed MFC, of tubular design, incorporates an air core surrounded by a carbon-based cathode, an anion exchange membrane , nonwoven graphite fabric, and encircled by twelve carbon brush anodes. This setup successfully reduced chemical oxygen demand (COD) from 180 to 50 mg L −1 and biological oxygen demand (BOD) from 84 to 15 mg L −1 within a 35 h hydraulic retention time (HRT). The resulting effluent BOD satisfies Japanese wastewater treatment standards. In the early HRT phase, the MFC exhibited rapid OM reduction, followed by a stabilization of OM concentration. Despite varying HRTs and the sustained OM levels at prolonged HRTs, the MFC consistently generated 0.29 ± 0.14 A m −2 . This apparent contradiction prompted the consideration of additional OM sources from the anode biomass ( C b ). Calculating electricity production based on OM concentration rather than OM degradation was achieved by assessing anode resistance ( R A n ) across different levels of OM supplementation, employing the Butler–Volmer equation. This approach, incorporating considerations for C b and R A n , accurately reproduced MFC performance. It was observed that OM supplementation from C b constituted 50% at 11 h HRT and escalated to 90% at 27 h HRT. Further analysis, including 16S rRNA gene-based microbial community profiling, indicated that higher cathode resistance ( R Cat ) at 1.0 Ω m 2 , compared to a minimum R A n of 0.10 Ω m 2 , favored methanogenesis over electrogenesis on the carbon brushes. This finding underscores the importance of reducing R Cat and minimizing electrode distance, coupled with enhancing the specific surface area of both electrodes, as crucial factors for the advancement of MFC technology.

Power Overshoot in Two-Chambered Microbial Fuel Cell (Mfc)

Controlling the Occurrence of Power Overshoot by Adapting Microbial Fuel Cells to High Anode Potentials

Effect of Electricity on Microbial Community of Microbial Fuel Cell Simultaneously Treating Sulfide and Nitrate

Effect of Operating Modes on Simultaneous Anaerobic Sulfide and Nitrate Removal in Microbial Fuel Cell

[Effect of the Initial Anode Potential on Electricity Generation in Microbial Fuel Cell].

Power generation in fed-batch microbial fuel cells as a function of ionic strength, temperature, and reactor configuration.

An Integrated Aerobic-Anaerobic Strategy for Performance Enhancement of Pseudomonas Aeruginosa-Inoculated Microbial Fuel Cell.

Multiparameter optimization of microbial fuel cell outputs using linear sweep voltammetry and microfluidics

Electricity Production by an Overflow-Type Wetted-Wall Microbial Fuel Cell.

[Electricity generation performance of two-chamber microbial full cell in the treatment of simulated wastewater]

Increasing Power Generation for Scaling Up Single-Chamber Air Cathode Microbial Fuel Cells.

Effect of Nitrate on Electricity Generation in Single-Chamber Air Cathode Microbial Fuel Cells

Increasing Intracellular Releasable Electrons Dramatically Enhances Bioelectricity Output in Microbial Fuel Cells

Improved Performance of Microbial Fuel Cells Enriched with Natural Microbial Inocula and Treated by Electrical Current

Increased Power Generation in a Continuous Flow MFC with Advective Flow Through the Porous Anode and Reduced Electrode Spacing

Optimization of Microbial a Fuel Cell with Linear Sweep Voltammetry and Microfluidics

Anode biomass rather than soluble organic matter is fuel for electricity production in microbial fuel cell at longer hydraulic retention time

Electricity Generation from Organic Wastewater Using a Continuous-Flow Single Chamber Microbial Fuel Cell

Power production using a batch double‐chamber microbial fuel cell from brewery wastewater: Effects of electron acceptors

A simple microbial fuel cell model for improvement of biomedical device powering times

Increased power generation from cylindrical microbial fuel cell inoculated with P. aeruginosa