Abstract:For low costs, numerical simulation is an effective method to reveal the internal mechanisms inside a thermal plasma torch. Various simulation models for studying the inside or outside characteristics of thermal plasma torches have been built and discussed. However, to reveal the inside mechanisms of thermal plasma torches under various working conditions to support the materials processing, more attention should be paid to building precise models of laminar plasma torches. Thus, based on the user-defined function (UDF) and user-defined scalar (UDS) of ANSYS Fluent software, the assumptions, governing equations, boundary conditions, and solving method were discussed in detail, and a corresponding numerical model of a homemade laminar plasma torch was first built. For verifying the effectiveness of the proposed numerical model and studying the influence of the gas components on the arc characteristics, the working conditions and experimental setups were introduced in sequence. Finally, the numerical and experimental results of the homemade laminar plasma torch were obtained and discussed in detail. The study results show that: 1 The axial temperature of the plasma torch could be divided into three sections along the axis: peak temperature area (10 mm < x < 20 mm), stable temperature area (20 mm < x < 62 mm) and decrease temperature area (62 mm < x < 95 mm). Under the same input conditions, when pure argon gas was used, the peak temperature at the outlet was reached at approximately 7590 K, while for pure nitrogen and 50%Ar + 50%N2, the corresponding peak temperatures were 6785 K and 7402.2 K, respectively. 2 The axial velocity of pure nitrogen is much higher than that of pure argon and 50%Ar + 50%N2, while that of pure argon and 50%Ar + 50%N2 has little difference. In addition, when nitrogen gas was used, the peak velocity at the outlet reached 185 m/s, whereas, for argon gas and 50%Ar + 50%N2, the corresponding peak velocities were 146 m/s and 169 m/s, respectively. 3 The simulated arc voltage trends under different working conditions are well in accordance with the experimental arc voltage trends.

Calculation Analysis on Statistic Thermodynamic Properties of Thermal Arc Plasmas

Computation Analysis on Properties of High Temperature Nitrogen Arc Plasmas

Calculation of Two-Temperature Thermodynamic and Transport Properties of Argon-Nitrogen Plasma

Thermophysical Properties Of Thermal Equilibrium And Non-Equilibrium Nitrogen Plasmas

Thermophysical Properties of Nitrogen Plasmas under Thermal Equilibrium and Non-Equilibrium Conditions

Analyses on the Nonequilibrium Transport Processes in a Free-Burning Argon Arc Plasma under Different Operating Conditions

Statistico Thermodynamic Analysis on Plasma Reaction

Theoretical Computation Studies for Transport Properties of Air Plasmas

Calculation of thermodynamic properties and transport coefficients of Ar-C-Si plasma

Application of Calibration-Free Boltzmann Plot Method for Composition and Pressure Measurement in Argon Free-Burning Arcs

The Reactive Thermal Conductivity of Thermal Equilibrium and Nonequilibrium Plasmas: Application to Nitrogen

Thermodynamic Properties and Transport Coefficients of Air Thermal Plasmas Mixed with Ablated Vapors of Cu and Polytetrafluoroethylene

Numerical Simulation of Heat Transfer and Fluid Flow of a Non-Equilibrium Argon Plasma Jet with Confined Wall

Review of Microscopic Property Calculation of Equilibrium and Non-Equilibrium Arc Plasma

Thermodynamic and Transport Properties of Real Air Plasma in Wide Range of Temperature and Pressure

Studies on Properties Calculation Models of Equilibrium and Non-equilibrium Plasma

Thermophysical Properties of Carbon–argon and Carbon–helium Plasmas

Modeling of the Arc Characteristics inside a Thermal Laminar Plasma Torch with Different Gas Components

Three-Dimensional Non-equilibrium Modeling on the Characteristics of the Dual-Jet Direct-Current Arc Plasmas

Calculation of Radiative Properties for [82%Ar-18%CO2]-Fe Plasmas in MAG Welding Arc

Characterization Of An Atmospheric Double Arc Argon-Nitrogen Plasma Source