Abstract:Improvement of the mechanical properties of polycarbonate by adding CNTs and a new additive with electron‐deficient aromatics. In initial experiments the effects of aromatic model substances on carbon nanotube (CNT) dispersions in dimethylformamide (DMF) were investigated. Electron‐deficient aromatics interact strongly with CNTs, causing increased agglomeration and sedimentation. Conversely, electron‐donating aromatics stabilize CNT dispersions in DMF. Polymers with electron‐deficient aromatics, such as polydinitrostyrene (PDNS), exhibit a concentration‐dependent effect: low concentrations lead to stabilization of dispersions, while higher concentrations lead to sedimentation. This suggests that such polymers can enhance attraction between the matrix of CNT‐reinforced polymers as well as stabilize the dispersed CNTs. Polycarbonate, modified with polydinitrocarbonate (PDNC) and reinforced with CNTs showed improved mechanical properties. The addition of 6 wt.% CNTs and 6 wt.% PDNC resulted in a notable improvement with a 22% increase in tensile strength, a 29% increase in flexural strength, a 39% increase in Young's modulus and a 47% increase in flexural modulus. This enhancement resulted in an overall mechanical performance comparable to the high‐performance polymer polyetherimide. However, there must be noted, that the addition of PDNC increases the CNT particle size, which can negatively affect mechanical properties. The results highlight the additive's dual role in enhancing adhesive interactions while potentially increasing CNT agglomerate sizes. Highlights Interactions of CNTs dispersed in DMF and various aromatics were investigated. Polydinitrocarbonate (PDNC) was synthesized as a new additive for CNT‐composites. Polycarbonate/CNT‐composites were obtained using extrusion. Test specimens with CNT contents up to 6 wt.% were obtained. Mechanical properties of polycarbonate reached the level of polyetherimide.

Reinforcement of poly(vinyl chloride) and polystyrene using chlorinated polypropylene grafted carbon nanotubes

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

PPTA-oligomer Functionalized Multiwalled Carbon Nanotubes Synthesized by "One-Pot" Method for Reinforcement of Polyvinyl Chloride

A Nanocomposite Structure Based on Modified MCM-48 and Polystyrene

Carbon Nanotubes- Filled Thermoplastic Polyurethane- Urea And Carboxylated Acrylonitrile Butadiene Rubber Blend Nanocomposites

Chemical functionalization of carbon nanotubes for the mechanical reinforcement of polystyrene composites

Multiscale Carbon Fibre–Carbon Nanotube Composites of Poly(Vinyl Chloride)—An Evaluation of Their Properties and Structure

The effect of the addition of carbon nanotube fluids to a polymeric matrix to produce simultaneous reinforcement and plasticization

Integration of PDA Chemistry and Surface‐Initiated ATRP to Prepare Poly(methyl Methacrylate)‐grafted Carbon Nanotubes and Its Effect on Poly(vinylidene Fluoride)–carbon Nanotube Composite Properties

Mechanical and Thermal Properties Modeling, Sorption Characteristics of Multiscale (Multiwalled Carbon Nanotubes/Glass Fiber) Filler Reinforced Polypropylene Composites

Single-Walled Carbon Nanotubes Functionalized with High Bonding Density of Polymer Layers and Enhanced Mechanical Properties of Composites

Matrix‐polymer‐functionalized Multiwalled Carbon Nanotubes As a Highly Efficient Toughening Agent for Matrix Polymers

Simultaneous improvement of tensile strength and toughness of polylactic acid by incorporating a biodegradable core‐shell nanofiller with double polymer layers

Fabrication and characterization of microwave cured high-density polyethylene/carbon nanotube and polypropylene/carbon nanotube composites

The Injected Foaming Study of Polypropylene/Multiwall Carbon Nanotube Composite with In Situ Fibrillation Reinforcement

Functionalization of multi-walled carbon nanotubes with non-reactive polymers through an ozone-mediated process for the preparation of a wide range of high performance polymer/carbon nanotube composites

Toughness Enhancement of Poly(methyl methacrylate) (PMMA)/Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Nanocomposites by Multiwall Carbon Nanotubes (MWNT)

Improved stability of volume resistivity in carbon black/ethylene-vinyl acetate copolymer composites by employing multi-walled carbon nanotubes as second filler

An investigation on the toughening behavior and morphology of acrylonitrile butadiene styrene/polybutylene terephthalate blends reinforced by carbon nanotubes

Mechanical properties of carbon nanotube (CNT) reinforced polymers using electron‐deficient aromatics as additives