Abstract:We describe two operating modes for the same potentiostat, where the redox processes of hydroquinone in a hydrochloric acid medium are contrasted for cyclic voltammetry (CV) as functions of a digital/staircase scan and an analogue/linear scan. Although superficially there is not much to separate the two modes of operation as an end user, differences can be seen in the voltammograms while switching between the digital and analogue modes. The effects of quantization clearly have some impact on the measurements, with the outputs between the two modes being a function of the equivalent-circuit model of the electrochemical system under investigation. Increasing scan rates when using both modes produces higher peak redox currents, with the differences between the analogue and digital modes of operation being consistent as a function of the scan rate. Differences between the CV loops between the analogue and digital modes show key differences at certain points along the scans, which can be attributed to the nature of the electrolyte affecting the charging and discharging processes and consequently changing the peak currents of the redox processes. The faradaic processes were shown to be independent of the scan rates. Simulations of the equivalent-circuit behaviour show differences in the responses to different input signals, i.e., the step and ramp responses of the system. Both the voltage and current steps and ramp responses showed the time-domain behaviour of distinct elements of the equivalent electrochemical circuit model as an approximation of the applied digital and analogue CV input signals. Ultimately, it was concluded that similar parameters between the two modes of operation available with the potentiostat would lead to different output voltammograms and, despite advances in technology, digital systems can never fully emulate a true analogue system for electrochemical applications. These observations showcase the value of having hardware capable of true analogue characteristics over digital systems.

Progress in Oscillographic Chronopotentiometry

New Progress Of Investigation On Oscillographic Analysis

Oscillographic Chronopotentiometry With High And Low Frequency Current

A Study Of Multi-Order Semidifferential Oscillographic Chronopotentiometry

A STUDY ON A MULTI-ORDER SEMI-DIFFERENTIAL OSCILLOGRAPHIC CHRONOPOTENTIOMETRIC INSTRUMENT

The Investigation Of Oscillographic Chronopotentiometry At Silver Disk Electrode And Its Mechanism

Development of oscillographic analysis in China: II. Fundamental theory of oscillographic analysis

Small Oscillogram and Its Application

Reciprocal Oscillo-Chronopotentiometry

Surface Plasmon Resonance Coupled with Potential‐step Chronoamperometry: Theory and Applications for Quantitative Measurements of Electrodeposited Thin Films

Advances in A.C. Oscillopolarography

Investigations on Cyclic Reciprocal Derivative Chronopotentiometry. Part 1. Theory for a Reversible Reaction

INVESTIGATIONS ON CYCLIC RECIPROCAL DERIVATIVE CHRONOPOTENTIOMETRY Ⅲ. THEORETICAL EQUATIONS FOR AN IRREVERSIBLE REACTION

Theoretical investigation on cyclic reciprocal derivative chronopotentiometry

THE THEORY AND EXPERIMENTAL-VERIFICATION OF DOUBLE POTENTIAL STEP CHRONOAMPEROMETRY AND CHRONOCOULOMETRY AT ULTRAMICRODISK ELECTRODES

Fourier Spectrum of Ac Cyclic Oscillochronopotentiometry Responses

Investigation On Cyclic Reciprocal Derivative Chronopotentiometry. Part Ii. Theoretical Equation For An Irreversible Reaction

Study of Reversible Electrode Processes with Unsymmetrical Cyclic Reciprocal Derivative Chronopotentiometry

Simultaneous Determination of Lead and Zinc in Alloy by Slow Sweep Oscillographic Chronopotentiometry

CMOS Potentiostat for Chemical Sensing Applications

Influence of Potentiostat Hardware on Electrochemical Measurements