Abstract:The dynamic modulus (|Em*|) of asphalt mixtures is one of most fundamental mechanical parameters used in flexible pavement design, which has been extensively estimated through various predictive models. However, most of existing dynamic modulus predictive models does not fit well for the purpose of the Level 3 (the lowest input level) flexible pavement design in the current AASHTOWare Pavement ME Design due to the following major deficiencies: (1) lacking physical significance; (2) providing poor prediction accuracy; and (3) requiring laboratory testing to obtain key model parameters. To address these deficiencies, this paper is aimed to develop a new model on the basis of the law of mixtures. First, a large database is collected and revised for the new model development. Two exiting law of mixture models are then evaluated in terms of the mode prediction accuracy, and neither of them provided satisfactory prediction results. A new model is subsequently developed, which involves using a parallel form to represent the contribution of each of three phases (asphalt, aggregate and air void) to the |Em*| as well as utilizing a standard sigmoid function to characterize the mechanical response of asphalt mixture. Statistical analysis shows that the new model has comparable prediction performance with traditional Witczak models, but with significantly lower number of input variables and relatively higher model quality. Supplemental data collected from laboratory tests and independent literature sources finally validate that the new model has the capability to provide an accurate prediction of |Em*| with an R2 value up to 0.90. In these regards, the new model is believed to be a good candidate for the |Em*| prediction of asphalt mixtures for a reliable Level-3 flexible pavement design.

Is Normal Distribution the Most Appropriate Statistical Distribution for Volumetric Properties in Asphalt Mixtures?

Statistical Analysis of the Asphalt Mixtures Volumetric Properties

Effects of Asphalt Binder Type on Mixing Flowability and Workability Index of Asphalt Mixtures

Application of statistical methods in evaluating asphalt mixture homogeneity

Evaluating Asphalt Mixture Homogeneity Based on Fractal Theory

Numerical Simulation of Effect of Horizontal Aggregate Distribution in Asphalt Mixtures on Splitting Test

Aggregate Distribution Influence On The Indirect Tensile Test Of Asphalt Mixtures Using The Discrete Element Method

The Representative Volumetric Parameter for Dense-Graded Asphalt Mixture

A New Dynamic Modulus Predictive Model for Asphalt Mixtures Based on the Law of Mixtures

Towards an Index of Asphalt Mixture Homogeneity

Vertical Void Distribution and Uniformity Analysis of Asphalt Mixtures Using Three-Stage Exponential Model

Effects of Asphalt-Aggregate Ratios and Compaction Efforts on Horizontal Aggregate Homogeneity in Asphalt Mixtures

Analysis of Distribution Properties of Coarse Aggregates in HMA Based on Delaunay Triangulation

Air voids distribution of asphalt mixtures in different compaction methods and aggregate gradations

Simulation of Effect of Horizontal Aggregate Distribution on Indirect Tensile Test of Asphalt Mixtures Using Discrete Element Method

Influence of gradation on volume characteristics and engineering performance of asphalt mixture

Factors affecting splitting strength of asphalt mixture

Test Research on Determining Theoretical Maximum Density of Asphalt Mixtures

Mix Design Method for Asphalt Mixtures Based on the Fractal Characteristic of Aggregate

The Influence of the Change of Gradation on Asphalt Mixture's Volume Parameters

Study on the correlation between spatial variability of asphalt mixture material parameters and fracture performance