An Experiment on Drying,Cooking and Reeling Cocoons of Ultrafine Filament
QIAN Wen-Chun,YU Rong-Feng,YANG Yong-Jian,YAN Hai-Jian,SHAO Guo-Chang,LOU Li-Jing,SHI Lian-Gen
DOI: https://doi.org/10.13441/j.cnki.cykx.2013.05.026
2013-01-01
Abstract:In order to produce high-quality raw silk of ultrafine size,various treatments were tested to dry,cook and reel raw cocoons of ultrafine filament whose single yarn size was about 1. 1 dtex. Based on the reeling data,appropriate major process condition for drying cocoons was: primary drying at 90 ℃ for 90 min and a range of long pile back for 12 h,second drying from 90 ℃ down to 75 ℃ evenly and maintaining at 75 ℃ for 120 min. That for cooking cocoons was: high temperature permeating stage at 95 ℃,low temperature permeating stage at 55 ℃,steaming stage at 95 ℃,finishing stage at 80 ～ 90 ℃,guarded exit stage at 50 ℃,and cooking time 7 min. That for reeling cocoons was: the collection device with magnetic eye aperture at 60 ～ 70 μm,croisure length about 14 cm,end-groping temperature at 90 ℃ ± 3 ℃,reeling water temperature at 36 ℃ ± 3 ℃,flow rate at 700 mL /min ± 100 mL /min,reeler speed about 80 ～ 100 r /min,and manual fixed-cocoon-number end feeding. The results indicated that drying cocoon with lower temperature and longer time and steaming cocoon with lower temperature and shorter time are favorable to improve the reelability of cocoons and cleanness and neatness of raw silk. Lower reeler speed,high end-groping temperature and higher reeling water temperature are favorable to increase reelability of cocoons. Turning the reeler's automatically sensed fixed-filament-size end feeding into manual fixed-cocoon-number end feeding,using small aperture magnetic eye collection device,and setting longer croisure length are favorable to enhance quality of the raw silk.