Abstract:Cooling load calculation can significantly affect the first cost, energy consumption, and performance of air-conditioning systems. Current peak cooling load calculation theories and methods are developed based on all-air systems, which remove the room heat gains through purely convective heat transfer. Studies found that they are not suitable for radiant systems that remove room heat gains through both radiation and convection, especially for the integrated operation of radiant terminal and dedicated outdoor air system (DOAS). This study proposed a revised radiant time series method (RTSM) to calculate the cooling load for radiant systems. The method assumes the heat transfer rate of the radiant terminal as a negative “heat gain” and uses radiant time series factors to calculate the cooling load for DOAS. From the results of an example room, we find that the proposed RTSM has good accuracy compared to the heat balance method (HBM), while it slightly underestimates/overestimates the cooling load for radiant terminal/DOAS. Besides, a parametric simulation with 34,992 cases considering nine impact factors was performed. We find that compared to HBM, the relative errors of the peak cooling loads for the majority of the cases are within ± 10%, and the peak load occurring time differences are very minor, which are within the accuracy range of engineering applications. In summary, the revised RTSM was developed to offer a rigorous cooling load calculation approach for radiant systems, yet does not require complicated iterative calculations. Moreover, though originated from HBM, it has additional advantage of quantifying the cooling load converted from different heat gains separately, which is preferred in engineering applications.

Distribution Ratio of Radiant Heat and Its Effect on Cooling Load

Application of Radiant Floor Cooling in a Large Open Space Building with High-Intensity Solar Radiation

Cooling load differences between radiant and air systems

Performance Investigation of Convective and Radiant Heat Removal Methods in Large Spaces

Influence factors and calculation method of radiant panel cooling capacity

A Quantitative Relationship Between Heat Gain and Local Cooling Load in a General Non-Uniform Indoor Environment

Investigating the Effect of Solar Heat Gain on Intermittent Operation Characteristics of Radiant Cooling Floor

Cooling Performance Comparison of Radiant Floor System and All-air System with Solar Radiation

Direct Relationship Between the System Cooling Load and Indoor Heat Gain in a Non-Uniform Indoor Environment

Several Problems Of Air Conditioning System Design

Study on the calculation of unsteady radiant heat transfer load with stratified air distribution based on harmonic reaction method

Cooling Capacity Prediction of Radiant Floors in Large Spaces of an Airport

Influence Of Sensible Cooling Load On Indoor Air Distribution In An Office Room With Ceiling Cooling And Mixing Ventilation

Comparison of Cooling Load Between Radiant Slab and Air Systems in Large Space Buildings with Solar Radiaiton

A revised radiant time series method (RTSM) to calculate the cooling load for pipe-embedded radiant systems

Numerical simulation of the influencing factors of radiant floor heating system

The Influence of Heat Source Distribution on the Space Cooling Load Oriented to Local Thermal Requirements

Simplified calculation for cooling/heating capacity, surface temperature distribution of radiant floor

Influencing Factors on Infiltration Rate of Heating Rooms in Hot Summer and Cold Winter Zone

Cooling loads for nonresidential buildings based on programmable, charted, look-up-tabulated radiant time series procedure

Effect of the Factors of A Heat Source on the Heat Distribution Coefficient in an Upward Displacement Room