Abstract:In this work, the effect of a hydrothermal environment on mechanical properties and the electrical response behavior of continuous carbon fiber/epoxy (CFRE) composite produced by the pultrusion method were investigated. Due to the relatively uniform distribution of fibers and lack of resin-rich interlayer area, this effect for the pultruded CFRE composite plates is different from the common CFRE laminated composites. Firstly, its hygroscopicity behavior was studied. The absorption ratio increases rapidly to 1.02% within 3 days before reaching a relatively stable state. A three-point bending test, a Vickers hardness test, a thermogravimetric analysis (TGA), and a scanning electron microscope (SEM) analysis were performed to investigate the effect of the hydrothermal environment on the mechanical properties and thermal stability of the CFRE composite. The results indicated that the bending strength decreased quickly within 3 days of hydrothermal treatment, followed by a stable trend, which coincided with that of the hygroscopicity behavior of the composites. The fracture surface analysis indicated that the interfacial properties of carbon fibers in the epoxy matrix were decreased after the hydrothermal treatment, and more carbon fibers could be pulled out from the CFRE in the hygroscopic state. After the hydrothermal treatment, the micro-hardness of the composites was reduced by 25%. TGA confirmed the decreased thermal stability of the CFRE composites after the hydrothermal treatment as well. Moreover, the hydrothermally treated CFRE composites could a reach stable resistance response more readily. The revealing of the effect of moisture and hot environment on the mechanical properties and electrical response behavior of pultruded CFRE composites prepares the ground for their design and practical application in the corresponding environment.

Effect of Hygrothermal Treatment with High Temperature and Pressure on Electrical Properties in Epoxy Composite

Effects of Hygrothermal Aging and Cyclic Compressive Loading on the Mechanical and Electrical Properties of Conductive Composites

Investigation of Electrical and Thermal Behavior of Modified Epoxy Structures for DC and High Frequency Applications

Synergistic Effects of Micro-hBN and Core-Shell Nano-TiO2@SiO2 on Thermal and Electrical Properties of Epoxy at High Frequencies and Temperatures

Space charge performance of epoxy composites with improved thermal property at high temperature under high electric field

Charge Dynamics and Thermal Properties of Epoxy Based Micro and Nano Hybrid Composites at High Temperatures

Ultra-High Molecular Weight Polyethylene Fibers/Epoxy Composites: Effect of Fiber Treatment on Properties

Enhanced Interfacial, Mechanical, and Anti-Hygrothermal Properties of Carbon Fiber/cyanate Ester Composites with the Catalytic Sizing Agents of Titanium Epoxy

Effect of Hydrothermal Environment on Mechanical Properties and Electrical Response Behavior of Continuous Carbon Fiber/Epoxy Composite Plates

Dynamic Mechanical Properties and Thermal Effect of an Epoxy Resin Composite, Encapsulation’s Element of a New Electronic Component

Study of Heat Treatment Effect on Mechanical Properties of Epoxy Resin Reinforced with Fiber Glass

Experimental research on hygrothermal properties of carbon fiber/epoxy resin composite under different hygrothermal conditions

Tensile And Compress Property Of Composite Laminate In Hygrothermal Environment

Optimization of the Temperature-Dependent Electrical Resistivity in Epoxy/Positive Temperature Coefficient Ceramic Nanocomposites

Chemical, mechanical and morphological investigation on the hygrothermal aging mechanism of a toughened epoxy

Study on Properties of Composite Laminate with A Hole in the Hygrothermal Environment

Improvement of the Electrical Resistivity of Epoxy Resin at Elevated Temperature by Adding a Positive Temperature Coefficient BaTiO3-based Compound

High Strain Rate Effect Of Carbon Fiber Laminates Under Hygrothermal Environment

High‐temperature resistance and excellent electrical insulation in epoxy resin blends

Experimental study on the effect of thermal aging on epoxy composites used for UHV dry bushing

Thermal Treatment Effects on Structure and Mechanical Properties of Polybutylene Terephthalate and Epoxy Resin Composites Reinforced with Glass Fiber