Abstract:Both the nonisothermal and isothermal crystallization kinetics under the influences of different shear conditions for poly(lactic acid) (PLA) were investigated by rheometry. The nucleation and growth of PLA spherulites during isothermal crystallization with different shear conditions were observed by polarized optical microscopy (POM). Shear-induced nucleation rate enhancements of PLA were studied on the basis of the prerequisite determination of the critical shear rates, for which the stretch of the longest chains (high molecular mass tails) of PLA would be expected. The transitions between different shear flow regimes for shear-induced crystallization of PLA at the temperature of 135 C were determined by two characteristic Weissenberg numbers on the basis of reptation time and Rouse time for the high molecular mass tails, which were determined through combination of the discrete Maxwell relaxation time spectra of PLA at the reference temperature of 190 C and the Arrhenius type of temperature dependence for the horizontal shift factor, aT. It was then found that the crystallization process of PLA was greatly enhanced by shear compared to the quiescent condition, and the crystallization kinetics could be accelerated by the increased shear rate and/or shear time. It was more interesting to find that there existed a critical shear time under a certain shear rate, and a further increase in the shear time did not lead to further acceleration of the crystallization kinetics. POM observation indicated that the acceleration of crystallization kinetics was obviously brought about by the enhanced nucleus density under the application of shear and the subsequent spherulitic growth rates kept about constant. Thus, a kinetic model based on directly relating the extra number of activated nuclei promoted by shear to the shear rate was further applied to well predict the effects of shear time on the shear-induced isothermal crystallization kinetics of PLA. © 2013 American Chemical Society.

Rheological Testing on Shear Enhanced Chemical Reaction at SMA/PA6 Interface

Characteristic analysis on a reactive extrusion process for the imidization of poly(styrene-co-maleic anhydride) with aniline

Kinetic Analysis of the Imidization of Poly(styrene‐co‐maleic Anhydride) with Aniline in the Melt

APPLICATION OF DYNAMIC RHEOLOGICAL TECHNIQUE IN STUDYING CHAIN DIFFUSION AT POLYMER/POLYMER INTERFACE

Control of Diffusion/Barrier Effects of Polymer-Coated Particles and the Strengthening of Ethylene Polymerization Reactor

Interfacial Interaction Enhanced Rheological Behavior in PAM/CTAC/Salt Aqueous Solution-A Coarse-Grained Molecular Dynamics Study

Rheological Investigation with Palierne’s Model on a Polystyrene/Nylon 6 Blending Melt Compatibilized by a Polystyrene Grafted Maleic Anhydride

Influence of Processing Conditions on Percolation Threshold Value and Morphology of Co-continuous PA6/PS Blend

Rheological Study of Microstructures and Properties for Polymeric Materials

Simulative and experimental study of metal/polymer interfacial dynamic shear response

Rheological Property Modification of a Molten-State Polyamide through the Addition of an α-Olefin–Maleic Anhydride Copolymer

Visualization of Structural Deformation of Polymer Additives in Oil Under High Shear Flow

Shear Induced Phase Boundary Shift in the Critical and Off-Critical Regions for A Polybutadiene/Polyisoprene Blend

Rheologically determined critical shear rates for shear-induced nucleation rate enhancements of poly(lactic acid)

The influence of body weight on reproductive function in women.

Influence of Shearing on Impact Polypropylene Copolymer: Phase Morphology, Thermal and Rheological Behavior

Reactive Spreading Dynamics of Molten Polymer Liquids

Rheological Behavior and Nonisothermal Crystallization of Polypropylene/Epoxidized Natural Rubber Blends

MORPHOLOGICAL EVOLUTION AND VISCOELASTIC BEHAVIOR OF COMPATIBILIZED HDPE/PA6 BLENDS

Modulation of rheological behaviors of hydrophobically modified polyacrylamide based on micellar kinetics

Revealing the Shear Effect on the Interfacial Layer in Polymer Nanocomposites through Nanofiber Reorientation