Abstract:Stress distribution on a membrane surface plays a key role in the structural safety and bearing capacity of an inflatable membrane structure, especially for the state under service condition. This paper presents an in situ method to determine the stress distribution of an inflatable membrane structure by using a force-finding method based on measured configuration. On the basis of the previous in situ measurement of geometrical shape and internal pressure, the target inflatable membrane structure is simplified to a membrane link structure with external forces on connection nodes. As a result, the stress distribution of the target structure can be determined based on the optimal solution of force equilibrium between the membrane internal force and internal pressure, as well as the thickness of the constructive membrane material. In order to validate the proposed method, the stress distribution of an experimental model of ETFE (ethylene-tetrafluoroethylene) cushion structure is evaluated following the suggested determining procedure. By carefully comparing the determining results with the numerical results for the forming process of the ETFE cushion model, acceptable agreement is obtained in terms of the stress distributions in the x-direction and maximum principle stress. Furthermore, the influence of mesh size on the stress distribution is also investigated by using four mesh sizes during the determining process. It is thus demonstrated that the proposed method is suitable for determining the stress distribution of an inflatable membrane under service conditions, which only requires the geometrical shape and inflated internal pressure of the final state, as well as the thickness of constructive material. (C) 2017 American Society of Civil Engineers.

The Force Analysis for Air Inflated Paraboloid Membrane Structure

Analysis Methods of Structural Design and Characteristics of Numerical Algorithm for ETFE Air Inflated Film Structures

ETFE Air Cushion Membrane Configurations,Structural Performances and Material Properties Experiments

Mechanical study on initial profile solution for inflatable reflector made of orthotropic material

Numerical Simulation of Whole Process and States of Tensile Membrane Structure

An Efficient Numerical Shape Analysis for Light Weight Membrane Structures

Cutting Pattern Design Method of Membrane Structures

Drape and Inflatable Mechanics of Membrane Inflatable Structure

Deployment simulation analysis of inflatable membrane structures

ENERGY-MOMENTUM BASED APPROACH FOR DEPLOYMENT ANALYSIS OF SPACE MEMBRANE STRUCTURES

Wind Tunnel Experiment and Numerical Simulation of Wind Pressure Distribution of Large-Span Membrane Structure

Thermal Distortion Analysis of Inflatable Antenna Structures Considering Inflation Gas

Design Method of Cable-Membrane Structures Considering Form-Finding Analysis and Force-Finding Analysis

IMPROVED NONLINEAR FORCE DENSITY METHOD ACCOUNTING FOR 2-DIMENSIONAL DEFORMATIONS OF MEMBRANE ELEMENT

FINITE ELEMENT MODELLING OF INFLATABLE MEMBRANE STRUCTURE BASED ON PHOTOGRAMMETRY

THE PRESSURE DEFORMATIONS OF ROTATING LNFLATABLE MEMBRANE STRUCTURE

Deformation of wrinkled membrane inflatable structures under concentrated loads

WRINKLING ANALYSIS OF SPACE INFLATABLE MEMBRANE STRUCTURES

Internal Force Analysis of Tensile Membrane Structures Using Curved Quadrilateral Elements

Analysis of Distributed Micro-Control Actions on Free Paraboloidal Membrane Shells

In Situ Determination of Stress Distribution of Inflatable Membrane Structure Using Force Finding Method