Abstract:Herein, we take an underground natural gas storage in the Ordos Basin as an example to explore the influence of temperature, CO2 flow rate, CO2 partial pressure, and chloride ion concentration on the corrosion rate of N80 and P110 steels in CaCl2 brine type. Meanwhile, in order to reduce the amount of chemical corrosion inhibitors and improve performance, a novel corrosion inhibitor with a quinoline quaternary ammonium structure named YS-QB was synthesized from 1-methyl-1,2,3,4-tetrahydroisoquinoline, epichlorohydrin, and oleic acid amide propyl dimethylamine. Under normal and high-pressure environments, YS-QB exhibits a superior corrosion inhibition effect to the market product of CX-1. In order to further reduce the amount of corrosion inhibitor and improve the corrosion inhibition effect, orthogonal experiments were conducted to optimize the formula system, and the optimal composite system was finally obtained by forming YS-QB, propargyl alcohol, hexamethylenetetramine, and isopropanol in a mass ratio of 12:1:1:2. At 80 °C, a dosage of 30 mg/L can suppress the CO2 corrosion rate below 0.076 mm/a, while a dosage of 60 mg/L can suppress the CO2 corrosion rate below 0.076 mm/a at a high-pressure environment of 120 °C. Combining weightlessness and electrochemical experiments, it is found that the composite corrosion inhibitor performs best when the dosage reached 100 mg/L, and a further increase in the dosage weakens the corrosion inhibition capacity. Based on the polarization curve changes with the dosage of the composite corrosion inhibitor, it can be determined that the final obtained composite corrosion inhibitor system was a cathodic corrosion inhibitor.

The Corrosion Inhibitor's Scanning in Transportation System of Super Acid Gas Field

Study on corrosion inhibitor technology in gas pipeline

Study on Corrosion of Injection Water Pipe and Its Corrosion Inhibitor

Corrosion Inhibition Properties of Corrosion Inhibitors to under-Deposit Corrosion of X65 Steel in CO2 Corrosion Conditions

The Study of Green Corrosion Inhibitors for Mild Steel 907 in Natural Seawater Environment

THE STUDY OF INHIBITIVE MECHANISM OF CORROSION INHIBITORS FOR CARBON STEEL IN NATURAL SEAWATER

Study on the foam releasion corrosion inhibitor for natural gas gathering and transferring metal pipe

Study on CO2 Corrosion Behavior of Underground Gas Storage Pipe Columns and Establishment of Corrosion Inhibition System

Effect of Inhibitor on Adsorption Behavior and Mechanism of Micro-Zone Corrosion on Carbon Steel.

DEVELOPMENT OF CORROSION INHIBITORS FOR STAINLESS STEEL IN HYDROCHLORIC ACID

Study on Performance of Several Corrosion Inhibitors for Aluminum in Hydrochloric Picking Solution

Мultifunctional Inhibitors of "INCORGAZ" and "AMDOR" Series against Hydrosulfide and Carbon Dioxide Corrosion of Steel

Study on Crack Initiation and Propagation of New Corrosion Inhibitor during Stress Corrosion of Aluminum Alloy

Preparation of a Corrosion Inhibitor Preventing H2S Corrosion and Coupon Test

Inhibition Efficiency of Migration Corrosion Inhibitors Assessed by Electro-osmosis Method

Studies on the Corrosion Inhibitor of Zinc in Hydrolfuoric Acid Solution

Experimental Study on Under-Deposit Corrosion and Its Inhibition Using Electrochemical Methods and Electronic Coupon Technique

PREPARATION OF A CORROSION INHIBITOR PREVENTING H_2S CORROSION AND COUPON TEST

Corrosion Inhibitor Selection Study for Topside Unit of a Subsea Platform

Electrochemical Research on Inhibition Mechanism of Thiazole in Gas or Oil Field

Development and Evaluation of Zinc Corrosion Inhibitor in Hydrochloric Acid