Abstract:Objective: A novel X-ray field produced by an ultrathin conical target is described in the literature. However, the optimal design for an associated collimator remains ambiguous. Current optimization methods using Monte Carlo calculations restrict the efficiency and robustness of the design process. A more generic optimization method that reduces parameter constraints while minimizing computational load is necessary. A numerical method for optimizing the longitudinal collimator hole geometry for a cylindrically-symmetrical X-ray tube is demonstrated and compared to Monte Carlo calculations. Approach: The X-ray phase space was modelled as a four-dimensional histogram differential in photon initial position, final position, and photon energy. The collimator was modelled as a stack of thin washers with varying inner radii. Simulated annealing was employed to optimize this set of inner radii according to various objective functions calculated on the photon flux at a specified plane. Main results: The analytical transport model used for optimization was validated against Monte Carlo calculations using Geant4 via its wrapper, TOPAS. Optimized collimators and the resulting photon flux profiles are presented for three focal spot sizes and five positions of the source. Optimizations were performed with multiple objective functions based on various weightings of precision, intensity, and field flatness metrics. Finally, a select set of these optimized collimators, plus a parallel-hole collimator for comparison, were modelled in TOPAS. The evolution of the radiation field profiles are presented for various positions of the source for each collimator. Significance: This novel optimization strategy proved consistent and robust across the range of X-ray tube settings regardless of the optimization starting point. Common collimator geometries were re-derived using this algorithm while simultaneously optimizing geometry-specific parameters. The advantages of this strategy over iterative Monte Carlo-based techniques, including computational efficiency, radiation source-specificity, and solution flexibility, make it a desirable optimization method for complex irradiation geometries.

An Optimized Collimator Scheme of Hxmt

Calibrating the HXMT Collimators Using Diffuse Illumination

Optical Optimization for Anti-Coincidence Detectors of a Hard X-ray Modulation Telescope

Point Source Detection Performance of Hard X-Ray Modulation Telescope Imaging Observation

HXMT: A Chinese High-Energy Astrophysics Mission

Constructing the Large-Scale Collimating Solar Simulator with a Light Half-Divergence Angle <1° Using Only Collimating Radiation Modules

An Accelerated Direct Demodulation Method for Image Reconstruction Using Spherical Data from the Hard X-Ray Modulation Telescope

HXMT Satellite for Space Hard X-ray Observation

Accelerated direct demodulation method for image reconstruction with spherical data from Hard X-ray Modulation Telescope

Numerical optimization of longitudinal collimator geometry for novel x-ray field

Studies on the time response distribution of Insigh}-HXMT/LE

Characterization of the eXTP-LAD collimators

Hybrid Optimization Methodology of Variable Densities Mesh Model for the Axial Supporting Design of Wide-Field Survey Telescope

Studies of A Solid Detector Array for High Energy X-Ray Imaging System Based on Ma-Pmt

Reconstructing Light Curves from HXMT Imaging Observations

An energy-optimized collimator design for a CZT-based SPECT camera

Calibration of the instrumental response of Insight-HXMT/HE CsI detectors for gamma-ray monitoring

Insight-HXMT on-orbit thermal control status and thermal deformation impact analysis

Optimized Optical System with a 1.65 M Wide-Field Corrector for the 6.5 M High-Performance MUltiplexed Survey Telescope

Performance of a focal plane detector for soft X-ray imaging spectroscopy based on back-illuminated sCMOS

A Preliminary Research on the Development of the Hard X-ray Imaging Telescope