Abstract:Current sensors based on the fluxgate magnetic field meter and feedback zero-field operating principle have excellent current measurement accuracy and linearity in a large range of up to thousands of amperes. An excitation current (${I}_{e}$ ) is employed in a magnetic fluxgate sensor to magnetize the magnetic core periodically, which will generate magnetization distortion that affects the performance of the sensor. This article proposes a novel scheme for suppressing the magnetization distortion through electrical compensation. The source of the magnetization distortion is theoretically derived and analyzed. It is found that the magnetization distortion is a function of the excitation current ${I}_{e}$ and is not affected by the primary current. Since ${I}_{e}$ is a periodical current that is determined by the parameters of the sensor itself, it is feasible to inject a specified periodical current to the output port of the sensor to cancel the magnetization distortion. Compared with the magnetization distortion compensation method with an additional core and coil, this method does not need to pair the cores or coils, which significantly reduces the complexity of the production process and saves space for the sensor. A prototype sensor with electrical compensation is designed, fabricated, and tested. Experimental results show that the compensation setting significantly suppresses the magnetization distortion signal. The amplitude of the basic frequency component is reduced from 24 to $6.8 ~\mu \text{V}$ . The other odd harmonics of the magnetization distortion are also reduced. The electrical compensation method works properly in a large current range from −1.5 to 1.5 kA. The scale accuracy of the prototype sensor is less than 5.7 ppm (parts per million). The compensation method can suppress the magnetization distortion to a similar level with operating temperature changes from room temperature to 50 °C.

Precise AC Magnetic Measurement under Sinusoidal Magnetic Flux by Using Digital Feedback of Harmonic Compensation

A Loss Measurement Approach of Power Magnetic Components under Practical Power Electronics Conditions

A DC Differential Method for Core Loss Measurement under Sinusoidal Excitation

A Novel Estimation Model for Hysteresis Loss Based on Semi-Minor Loops

Method of Improving the Measurement Accuracy of Magnetic Material Characteristic for Open Circuit Test Specimen

Power Loss Measurement System for Soft Magnetic Materials in Megahertz Frequencies

AC Magnetic Flux Leakage Testing With Real-Time Liftoff Compensation Using Double Layer Parallel-Cable Probe

Precise Measurements of Magnetic Inductance in Asynchronous Motors for High Performance Applications

Study of Nonlinear Excitation Circuits for Fluxgate Magnetometer

A Novel DC Differential Method for High Frequency Core Loss Measurement

Fast Digital Feedback Algorithm for Efficient Control of Magnetic Flux Density Waveforms

Improved High-Frequency Carrier Voltage Measurement for Position Estimation of Switched-Flux Permanent Magnet Machines

Improved Current Shunt Characterization Method for Core Loss Measurement

Comparative Analysis of Core Loss Calculation Methods for Magnetic Materials Under Nonsinusoidal Excitations

A System for Controllable Magnetic Measurements of Hysteresis and Barkhausen Noise

Calculation of core loss under distorted flux density with minor hysteresis loops for laminated steel structure

Study of Current Measurement Method Based on Circular Magnetic Field Sensing Array

Comparative Analysis of Magnetic Core Loss Measurement Methods with Arbitrary Excitations

Magnetic property measurement and analysis of high-frequency soft magnetic materials under non-sinusoidal excitation considering temperature effect

Electrical Compensation for Magnetization Distortion of Magnetic Fluxgate Current Sensor

The Direct Measurement Method of Magnetic Winding Losses