Abstract:Stress and couple stress distributions are determined analytically for a coated fiber in an infinite micropolar matrix, loaded remotely by classical symmetric stresses. The determined stresses are then compared with those predicted by Cauchy theory, a size dependence is predicted in the framework of micropolar theory, and when the fiber’s diameter is much larger than the characteristic length of the matrix, the classical prediction can be recovered. The exact average stress in a fiber for a fiber-matrix system (without interphase) is also compared with that approximately derived by the average equivalent inclusion method (AEIM), based on the micropolar Eshelby tensor given by Cheng and He [Int. J. Eng. Sci. 35 (7) (1997) 659], the results show that the approximate AEIM method can give an accurate prediction for the size dependence of the average stress in a fiber. A micro–macro transition method is also proposed to determine effective in plane moduli of a heterogeneous micropolar material, the effective shear and in plane bulk moduli of a micropolar composite with coated fibers are derived analytically by extending Mori–Tanaka’s method to a micropolar composite, and the effective shear and in plane bulk moduli for a two-phase fiber composite (without interphase) are also obtained as a special case. The results show that the effective in plane bulk modulus is identical to that obtained by Cauchy theory, however the effective shear modulus depends on fiber’s diameter, it increases with decreasing fiber’s diameter at the same fiber volume fraction, and the classical prediction is recovered when the fiber’s diameter becomes large compared to the matrix characteristic length.

Micromechanics of Micropolar Composites

A Variational Method for Non-Linear Micropolar Composites

Identification of Material Parameters of Micropolar Theory for Composites by Homogenization Method

Overall Plasticity of Micropolar Composites with Interface Effect

A micromechanics approach to homogenizing elasto-viscoplastic heterogeneous materials

A Continuum Micromechanical Theory of Overall Plasticity for Particulate Composites Including Particle Size Effect

Micromechanical modeling of mechanical properties of composite materials

A Micromechanical Method for Particulate Composites with Finite Particle Concentration

Micromechanics methods for evaluating the effective moduli of soft neo-Hookean composites

Effective moduli for micropolar composite with interface effect

Variational asymptotic homogenization of elastoplastic composites

Homogenized Moduli and Local Stress Fields of Unidirectional Nano-Composites

A Micromechanics Approach to Homogenizing Damageable Elastoplastic Heterogeneous Materials

Effective in Plane Moduli of Composites with a Micropolar Matrix and Coated Fibers

A New Micromechanical Approach of Micropolar Continuum Modeling for 2-D Periodic Cellular Material

On Micropolar Elastic Foundations

Overall Elastoplastic Property for Micropolar Composites with Randomly Oriented Ellipsoidal Inclusions

Micromechanical and numerical analysis of shape and packing effects in elastic-plastic particulate composites

The Effects of Dilatancy in Composite Assemblies As Micropolar Continua

Micromechanics of Magnetoelectroelastic Composite Materials: Average Fields and Effective Behavior