Abstract:Background: Modern EIT systems require simultaneously operating multiple functions for flexibility, interoperability, and clinical applicability. To implement versatile functions, expandable design and implementation tools are needed. On the other hand, it is necessary to develop an ASIC-based EIT system to maximize its performance. Since the ASIC design is expensive and unchangeable, we can use FPGAs as a prior step to the digital ASIC design and carefully classify which functions should be included in the ASIC. In this paper, we describe the details of the FPGA design adopted in the KHU Mark2.5 EIT system. Methods: We classified all functions of the KHU Mark2.5 EIT system into two categories. One is the control and processing of current injection and voltage measurement. The other includes the collection and management of the multi-channel data with timing controls for internal and external interconnections. We describe the implementation of these functions in two kinds of FPGAs called the impedance measurement module (IMM) FPGA and the intra-network controller FPGA. Results: We present functional and timing simulations of the key functions in the FPGAs. From phantom and animal imaging experiments, we show that multiple functions of the system are successfully implemented in the FPGAs. As examples, we demonstrate fast multi-frequency imaging and ECG-gated imaging. Conclusion: Given an analog design of a parallel EIT system, it is important to optimize its digital design to minimize systematic artifacts and maximize performance. This paper described technical details of the FPGA-based fully parallel EIT system called the KHU Mark2.5 with numerous functions needed for clinical applications. Two kinds of FPGAs described in this paper can be used as a basis for future EIT digital ASIC designs for better application-specific human interface as well as hardware performance.

High-speed digital-controlled variable voltage source with current monitor for EIT application.

A 12-BIT 400-Ms/s CURRENT-STEERING DAC WITH DEGLITCHING TECHNIQUE

A New Current Switch Driver with Improved Dynamic Performance Used for 500ms/s, 12-Bit Nyquist Current-Steering DAC.

High-Performance Programmable AC Signal Power Amplifier Using DSP-Based Discrete-Time Sliding Mode Control Technique

A Discrete-Time Sliding Mode Controlled Current-Source Inverter Used in AC Power Source

A Programmable Low Power Current Source for Bioimpedance Measurement: Towards a Wearable Personalized Health Assistant.

Digital Control of Three-phase Multilevel Current-source Converter

Design and Implementation of A Current Signal Isolator Based on FPGA

Design of Program-Controlled Current Source Based on DDS Technology

Digital control technique for multi-module current source converter

Design of a new excitation signal source for eddy current sensor

Electrical impedance imaging system using FPGAs for flexibility and interoperability

Research on Full-Digital Hysteresis Current Controlled Controllable Current Source

Design of a Digital Eddy Current Displacement Sensor Based on FPGA

A Current-Steering Self-Calibration 14-Bit 100-Msps DAC

A Digital Calibration for High-Resolution Current Steering DAC

Development of dual-mode precision current source for macro-microcomposite actuator based on field programmable gate array

An 8-Bit 700ms/s Current-Steering DAC

Exploration of Low-Power High-SFDR Current-Steering D/A Converter Design Using Steep-Slope Heterojunction Tunnel FETs

An FPGA-based system for generalised electron devices testing

Research of Nanosecond Pulse Current Detection Technology