Abstract:A thermoacoustic engine (TE), which converts thermal energy into acoustic power by the thermoacoustic effect, shows several advantages due to the absence of moving parts, such as high reliability and long lifetime associated with reduced manufacturing costs. Power output and efficiency are important criteria of the performance of a TE. In order to increase the acoustic power output and thermal efficiency of a Stirling TE, the acoustic power distribution in the engine is studied with the variable load method. It is found that the thermal efficiency is independent of the output locations along the engine under the same acoustic power output. Furthermore, when the pressure ratio is kept constant at one location along the TE, it is beneficial to increasing the thermal efficiency by exporting more acoustic power. With nitrogen of 2.5MPa as working gas and the pressure ratio at the compliance of 1.20 in the experiments, the acoustic power is measured at the compliance and the resonator simultaneously. The maximum power output, thermal efficiency and exergy efficiency reach 390.0W, 11.2% and 16.0%, which are increased by 51.4%, 24.4% and 19.4%, respectively, compared to those with a single R–C load with 750ml reservoir at the compliance. This research will be instructive for increasing the efficiency and making full use of the acoustic energy of a TE.

Working Characteristics of Stirling-type Thermoacoustic Engine Connected with Linear Alternator

Development of a Three-Stage Looped Thermoacoustic Electric Generator Capable of Utilizing Heat Source below 120 °C

Performance of a Looped Thermoacoustic Engine with Multiple Loads Capable of Utilizing Heat Source below 200 °C

Study on a Looped 2-Stage Thermoacoustic Engine

Study on the onset and damping process of a thermoacoustic stirling prime mover

Study on the Performance of a Looped Thermoacoustic Prime Mover With Resistance Tube

Impact of Working Gases on the Performance of a Thermoacoustic Engine With Gas and Liquid

Study on the Working Characteristics of Linear Alternator in Thermoacoustic Power Generation System

Performance Comparison of Looped Thermoacoustic Electric Generators with Various Thermoacoustic Stages

Influence of load impedance on performance of thermoacoustic engine

Experimental Study On A Thermoacoustic Engine With Brass Screen Stack Matrix

Investigation on the influence of working pressure on the performance of the thermoacoustically driven RC load

Theoretical and Experimental Investigation of Acoustic Field Adjustment of a Gas-Liquid Standing-Wave Thermoacoustic Engine

Performance of an Air‐cooled Looped Thermoacoustic Engine Capable of Recovering Low‐grade Thermal Energy

Performance comparison of thermoacoustic engines with constant-diameter resonant tube and tapered resonant tube

Effect of Resonance Tube Shape on Performance of Thermoacoustic Engine

Output characteristics of Stirling thermoacoustic engine

Simulation of the thermoacoustic engine with an acoustic amplifier

Investigation on streaming in a Stirling thermoacoustic engine

Study on Output Characteristics of 100 W-Class Thermoacoustic-stirling Electric Generators

Investigation on Output Characteristics of Thermoacoustic Engine by Variable-Load Method